If you can iron you can apply Edgemate! Just position edge banding and heat with either our hand held iron or edge banding machine. This item backing creates a permanent bond. Then simply cut and trim edging to make plywood look like solid stock. Accepts stains and finishes.

Ideal for Columns Bendable Sheet Material Attaches directly to framework or can be used to surface another material.You can also glue sheets together to create freestanding double-sided curves for greater design flexibility.6" minimum radius.Smooth pre-sanded (120 grit) surface makes it perfect for painting, veneering or laminating.Sheets measure 1/4" x 24" x 48".Sold individually.á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á á

Just position edge banding and heat with either our hand held iron or edge banding machine. This item backing creates a permanent bond. Then simply cut and trim edging to make plywood look like solid stock.

When you buy this veneer, there is no waste because it has straight, parallel edges and no defects. Approximate sizes usually run about 1/2'' over. You may mix sizes and species to meet the minimum $5.00 order. All dimensional veneers are plain sliced unless otherwise noted. Grain runs lengthwise.
Face Grade Veneer
Include and additional $4.00 to cover extra packaging and shipping costs for veneers over 36'' . Veneers are from 1/40'' to 1/28'' thick. All pieces from one order will be the same thickness, but subsequent orders may differ.
Minimum $5.00 order. Ash Birch Cherry Hickory Matte White Maple Mahogany Red Oak Rosewood Teak Walnut White Oak

Approximate sizes usually run about 1/2'' over. You may mix sizes and species to meet the minimum $5.00 order. All dimensional veneers are plain sliced unless otherwise noted.
Grain runs lengthwise.
Ash Birch Cherry Hickory Maple Mahogany Red Oak Rosewood Teak Walnut White Oak

Get a superior flexibility with A grade veneer laminated to a wood of the same or similar species. Because it is a bit thicker than many veneers, you will get a more luxurious appearance- and no black line. Telegraphing and checking are eliminated. And it is pre sanded, so you can virtually apply and finish.
Ash Birch Cherry Hickory Maple Mahogany Red Oak Rosewood Teak Walnut White Oak

View Large36700 View Large33667 View Large32757 View Large37357 View LargeBrushed Aluminum V-groove molding. View LargeBlack bevel-edged molding. View LargeBlack bevel-edged molding. View LargeBrushed Aluminum V-groove molding. View LargeBlack bevel-edged molding. Cross Section Elevation. Molding measures 1-1/2'' W x 48'' L

Real wood veneer finishes beautifully. Apply with standard woodworking glue.

Available in random 4'' to 12'' widths. Sizes generally run 8'' to 10'' in width. We will come as close as possible to matching your width request, but cannot guarantee exact size. Most veneers are shipped in 36'' lengths, except burls.Unfinished real woodAccepts stains and finishesSold per Square Foot.Save time and money! When you buy this veneer, there is no waste because it has straight, parallel edges and no defects. 36'' long veneer. Choose from 6'' or 10'' width. Unfinished real woodAccepts stains and finishesGains run lengthwise
Veneers are from 1/40'' to 1/28'' thick. All pieces from one order will be the same thickness, but subsequent orders may differ.
Sold per Square Foot. Price is rounded up to a full foot total. To calculate square foot area, multiply length (in inches) by width (in inches) and divide by 144. This will give you a square foot amount. Then round up to the next full number for your quantity. Place this quantity in the order form box. Indicate the exact size on the next screen.
Please note: For veneers over 36'', an additional $4.00 shipping charge is required and will be added to your order when we process it internally. When you buy this veneer, there is no waste because it has straight, parallel edges and no defects. Approximate sizes usually run about 1/2'' over. You may mix sizes and species to meet the minimum $5.00 order. All dimensional veneers are plain sliced unless otherwise noted. Grain runs lengthwise.
Face Grade Veneer
Include and additional $4.00 to cover extra packaging and shipping costs for veneers over 36'' . Veneers are from 1/40'' to 1/28'' thick. All pieces from one order will be the same thickness, but subsequent orders may differ.
Minimum $5.00 order. Ash Birch Cherry Hickory Matte White Maple Mahogany Red Oak Rosewood Teak Walnut White Oak

Bundles vary in width and length, but all veneers in the same bundle are the same length and width.Approximately 8-20 slices and minimum of 12 square feet per bundle.Sizes range from 8"-20" wide and 22"-24ö long; burl length is 12"-24".Ideal for jewelry and other small boxes, marquetry, furniture repair and construction.

Real wood veneers laminated to a special 10 mil thick paper backing made pliable to ensure dimensional stability. Flexible veneer easily cuts with a scissors, takes stains, finishes, and may be applied with contact adhesives. This 1/64'' thick veneer works beautifully when applied over curved surfaces. The 36'' X 96'' size is ideal for veneering indoor metal security doors. Grain runs lengthwise.
Ash Birch Cherry Hickory Maple Mahogany Red Oak Rosewood Teak Walnut White Oak

3/4'' wide by 650 feet long. Maximum visibility tape has three holed pattern for clear viewing of joint.

A convenient, no mess, sheet adhesive which is ideal for applying flexible veneer on smaller projects. Just place on substrate, position veneer and heat with a household iron. It's that easy! Available in 24'' width. Sold by the linear'' .

MDF Custom Curves available in three shapes: for framed corners, for inline corners, and half round. and corner both have 3" radius outer edge for use with 3/4" material. Half round has 1-1/2" radius with 3" flat.

Two ply polyester Edgemate with a hot melt adhesive backing

Use 3/4'' molding for plywood, and 13/16'' molding for laminated sheet goods. 3/4'' wide molding requires a 1/16'' kerf. 13/16'' molding requires a 5/64'' kerf.

This premium grade 1/64'' thick flexible veneer comes with a 10 mil thick paper for stability and a pressure sensitive adhesive applied to its backside. Simply cut the veneer to size with a scissors, peel off the backing, and apply to the substrate. You can strengthen the bond between the veneer and substrate by applying pressure with a veneer smoothing blade. Pressure sensitive veneer permanently bonds to wood, glass, plastic and metal. Not recommended for use on fir plywood. It also accepts stains and finishes.
Ash Birch Cherry Hickory Matte White Maple Mahogany Red Oak Rosewood Teak Walnut White Oak

Solid wood edging is perfect for furniture and other projects where a solid look is needed! Easily applied by hand with contact cement or other adhesives. Strips measure 7/8" wide x 6mm thick x 4' length. Available in Red Oak, Cherry and Maple.

Spanish Cedar Veneer is 10 mil paper backed. Size is 24'' X48''. Unfinished real woodAccepts stains and finishes

This Starter Veneer Kit contains 25 square feet of assorted raw veneers: Birch, Oak, Cherry, Walnut, and Mahogany. Random sizes 3'' to 8'' wide and 24'' to 36'' long. A perfect assortment for veneer repairs on smaller pieces of furniture. Thicknesses may vary from 1/32'' to 1/28''. Accepts stains and finishes.