This real wood inlay is heat activated! Just run over it with a household iron and it's securely applied! Comes in 36'' lengths.
Applying inlay bandings is a very simple operation. Using a router with a straight cutter bit and guide, rout out a groove the desired width and just a shade shallower than the banding. Now simply place the banding in the groove and run a hot iron or edge banding over it to activate the adhesive. When the inlay is set, simply sand lightly until it is level with the face of the project. If stains or fillers are to be used in finishing the project, it is necessary to protect the inlay from absorbing the color of the stain or filler by first sealing it.

This real wood inlay is heat activated! Just run over it with a household iron and it's securely applied! Comes in 36'' lengths.
Applying inlay bandings is a very simple operation. Using a router with a straight cutter bit and guide, rout out a groove the desired width and just a shade shallower than the banding. Now simply place the banding in the groove and run a hot iron or edge banding over it to activate the adhesive. When the inlay is set, simply sand lightly until it is level with the face of the project. If stains or fillers are to be used in finishing the project, it is necessary to protect the inlay from absorbing the color of the stain or filler by first sealing it.

This real wood inlay is heat activated! Just run over it with a household iron and it's securely applied! Comes in 36'' lengths.
Applying inlay bandings is a very simple operation. Using a router with a straight cutter bit and guide, rout out a groove the desired width and just a shade shallower than the banding. Now simply place the banding in the groove and run a hot iron or edge banding over it to activate the adhesive. When the inlay is set, simply sand lightly until it is level with the face of the project. If stains or fillers are to be used in finishing the project, it is necessary to protect the inlay from absorbing the color of the stain or filler by first sealing it.

This real wood inlay is heat activated! Just run over it with a household iron and it's securely applied! Comes in 36'' lengths.
Applying inlay bandings is a very simple operation. Using a router with a straight cutter bit and guide, rout out a groove the desired width and just a shade shallower than the banding. Now simply place the banding in the groove and run a hot iron or edge banding over it to activate the adhesive. When the inlay is set, simply sand lightly until it is level with the face of the project. If stains or fillers are to be used in finishing the project, it is necessary to protect the inlay from absorbing the color of the stain or filler by first sealing it.

This real wood inlay is heat activated! Just run over it with a household iron and it's securely applied! Comes in 36'' lengths.
Applying inlay bandings is a very simple operation. Using a router with a straight cutter bit and guide, rout out a groove the desired width and just a shade shallower than the banding. Now simply place the banding in the groove and run a hot iron or edge banding over it to activate the adhesive. When the inlay is set, simply sand lightly until it is level with the face of the project. If stains or fillers are to be used in finishing the project, it is necessary to protect the inlay from absorbing the color of the stain or filler by first sealing it.

This real wood inlay is heat activated! Just run over it with a household iron and it's securely applied! Comes in 36'' lengths.
Applying inlay bandings is a very simple operation. Using a router with a straight cutter bit and guide, rout out a groove the desired width and just a shade shallower than the banding. Now simply place the banding in the groove and run a hot iron or edge banding over it to activate the adhesive. When the inlay is set, simply sand lightly until it is level with the face of the project. If stains or fillers are to be used in finishing the project, it is necessary to protect the inlay from absorbing the color of the stain or filler by first sealing it.

This real wood inlay is heat activated! Just run over it with a household iron and it's securely applied! Comes in 36'' lengths.
Applying inlay bandings is a very simple operation. Using a router with a straight cutter bit and guide, rout out a groove the desired width and just a shade shallower than the banding. Now simply place the banding in the groove and run a hot iron or edge banding over it to activate the adhesive. When the inlay is set, simply sand lightly until it is level with the face of the project. If stains or fillers are to be used in finishing the project, it is necessary to protect the inlay from absorbing the color of the stain or filler by first sealing it.

This real wood inlay is heat activated! Just run over it with a household iron and it's securely applied! Comes in 36'' lengths.
Applying inlay bandings is a very simple operation. Using a router with a straight cutter bit and guide, rout out a groove the desired width and just a shade shallower than the banding. Now simply place the banding in the groove and run a hot iron or edge banding over it to activate the adhesive. When the inlay is set, simply sand lightly until it is level with the face of the project. If stains or fillers are to be used in finishing the project, it is necessary to protect the inlay from absorbing the color of the stain or filler by first sealing it.

This real wood inlay is heat activated! Just run over it with a household iron and it's securely applied! Comes in 36'' lengths.
Applying inlay bandings is a very simple operation. Using a router with a straight cutter bit and guide, rout out a groove the desired width and just a shade shallower than the banding. Now simply place the banding in the groove and run a hot iron or edge banding over it to activate the adhesive. When the inlay is set, simply sand lightly until it is level with the face of the project. If stains or fillers are to be used in finishing the project, it is necessary to protect the inlay from absorbing the color of the stain or filler by first sealing it.

This real wood inlay is heat activated! Just run over it with a household iron and it's securely applied! Comes in 36'' lengths.
Applying inlay bandings is a very simple operation. Using a router with a straight cutter bit and guide, rout out a groove the desired width and just a shade shallower than the banding. Now simply place the banding in the groove and run a hot iron or edge banding over it to activate the adhesive. When the inlay is set, simply sand lightly until it is level with the face of the project. If stains or fillers are to be used in finishing the project, it is necessary to protect the inlay from absorbing the color of the stain or filler by first sealing it.

Strips of brass to decorate your project. Comes in two sizes. All are 36'' Long X 1/32'' Thick.

DonÆt miss the boat on these cute, easy to install inlays!These allwood bandings add the perfect decorative touch to cribs, high chairs, toy boxes, or childrenÆs dressers.á All styles are 36'' Long x 3/4'' Wide x 1mm thick.
Please note: The fish and train inlay banding pictured at right is sold out.

Made of Real Wood! 1/2'' wide, 36'' long, and approximately 1/20'' thick. Easy to apply.
Applying inlay bandings is a very simple operation. Using a router with a straight cutter bit and guide, rout out a groove the desired width and just a shade shallower than the banding. Glue the banding into the groove. When the inlay is set, simply sand lightly until it is level with the face of the project. If stains or fillers are to be used in finishing the project, it is necessary to protect the inlay from absorbing the color of the stain or filler by first sealing it.

Made of Real Wood! 1/2'' wide, 36'' long, and approximately 1/20'' thick. Easy to apply.
Applying inlay bandings is a very simple operation. Using a router with a straight cutter bit and guide, rout out a groove the desired width and just a shade shallower than the banding. Glue the banding into the groove. When the inlay is set, simply sand lightly until it is level with the face of the project. If stains or fillers are to be used in finishing the project, it is necessary to protect the inlay from absorbing the color of the stain or filler by first sealing it.

Made of Real Wood! 1/4'' wide, 36'' long, and approximately 1/20'' thick. Easy to apply.
Applying inlay bandings is a very simple operation. Using a router with a straight cutter bit and guide, rout out a groove the desired width and just a shade shallower than the banding. Glue the banding into the groove. When the inlay is set, simply sand lightly until it is level with the face of the project. If stains or fillers are to be used in finishing the project, it is necessary to protect the inlay from absorbing the color of the stain or filler by first sealing it.

Made of Real Wood! 1/4'' wide, 36'' long, and approximately 1/20'' thick. Easy to apply.
Applying inlay bandings is a very simple operation. Using a router with a straight cutter bit and guide, rout out a groove the desired width and just a shade shallower than the banding. Glue the banding into the groove. When the inlay is set, simply sand lightly until it is level with the face of the project. If stains or fillers are to be used in finishing the project, it is necessary to protect the inlay from absorbing the color of the stain or filler by first sealing it.

Made of Real Wood! 1/4'' wide, 36'' long, and approximately 1/20'' thick. Easy to apply.
Applying inlay bandings is a very simple operation. Using a router with a straight cutter bit and guide, rout out a groove the desired width and just a shade shallower than the banding. Glue the banding into the groove. When the inlay is set, simply sand lightly until it is level with the face of the project. If stains or fillers are to be used in finishing the project, it is necessary to protect the inlay from absorbing the color of the stain or filler by first sealing it.

Made of Real Wood! 11/32'' wide, 36'' long, and approximately 1/20'' thick. Easy to apply.
Applying inlay bandings is a very simple operation. Using a router with a straight cutter bit and guide, rout out a groove the desired width and just a shade shallower than the banding. Glue the banding into the groove. When the inlay is set, simply sand lightly until it is level with the face of the project. If stains or fillers are to be used in finishing the project, it is necessary to protect the inlay from absorbing the color of the stain or filler by first sealing it.

Made of Real Wood! 11/32'' wide, 36'' long, and approximately 1/20'' thick. Easy to apply.
Applying inlay bandings is a very simple operation. Using a router with a straight cutter bit and guide, rout out a groove the desired width and just a shade shallower than the banding. Glue the banding into the groove. When the inlay is set, simply sand lightly until it is level with the face of the project. If stains or fillers are to be used in finishing the project, it is necessary to protect the inlay from absorbing the color of the stain or filler by first sealing it.

Made of Real Wood! 13/32'' wide, 36'' long, and approximately 1/20'' thick. Easy to apply.
Applying inlay bandings is a very simple operation. Using a router with a straight cutter bit and guide, rout out a groove the desired width and just a shade shallower than the banding. Glue the banding into the groove. When the inlay is set, simply sand lightly until it is level with the face of the project. If stains or fillers are to be used in finishing the project, it is necessary to protect the inlay from absorbing the color of the stain or filler by first sealing it.

Made of Real Wood! 3/16 plus 1/64 '' wide, 36'' long, and approximately 1/20'' thick. Easy to apply.
Applying inlay bandings is a very simple operation. Using a router with a straight cutter bit and guide, rout out a groove the desired width and just a shade shallower than the banding. Glue the banding into the groove. When the inlay is set, simply sand lightly until it is level with the face of the project. If stains or fillers are to be used in finishing the project, it is necessary to protect the inlay from absorbing the color of the stain or filler by first sealing it.

Made of Real Wood! 5/16'' wide, 36'' long, and approximately 1/20'' thick. Easy to apply.
Applying inlay bandings is a very simple operation. Using a router with a straight cutter bit and guide, rout out a groove the desired width and just a shade shallower than the banding. Glue the banding into the groove. When the inlay is set, simply sand lightly until it is level with the face of the project. If stains or fillers are to be used in finishing the project, it is necessary to protect the inlay from absorbing the color of the stain or filler by first sealing it.

Made of Real Wood! 9/32'' wide, 36'' long, and approximately 1/20'' thick. Easy to apply.
Applying inlay bandings is a very simple operation. Using a router with a straight cutter bit and guide, rout out a groove the desired width and just a shade shallower than the banding. Glue the banding into the groove. When the inlay is set, simply sand lightly until it is level with the face of the project. If stains or fillers are to be used in finishing the project, it is necessary to protect the inlay from absorbing the color of the stain or filler by first sealing it.

Made of Real Wood! 9/32'' wide, 36'' long, and approximately 1/20'' thick. Easy to apply.
Applying inlay bandings is a very simple operation. Using a router with a straight cutter bit and guide, rout out a groove the desired width and just a shade shallower than the banding. Glue the banding into the groove. When the inlay is set, simply sand lightly until it is level with the face of the project. If stains or fillers are to be used in finishing the project, it is necessary to protect the inlay from absorbing the color of the stain or filler by first sealing it.