All blanks measure 5 long x 5/8 square. Turns very quickly; take care turning with light pressure. Blanks can be finished after turning by sanding to a fine grit and then polishing on a buffing wheel with Corian polish, buffing compound or Hut finishing blocks. Each blank is sold individually.
Black and White Acrylic Pen Blank #19811 Black and Gold Acrylic Pen Blank #19829
Black and Blue Acrylic Pen Blank #19837 Purple, Teal, Blue and Yellow Acrylic Pen Blank #19845 Black with Yellow Ribbon Acrylic Pen Blank #19853
Sample of finished letter openers using black and gold, black and yellow ribbon, and black and white acrylic pen blanks. Pen kits also available! Keyring, and Toothpick Keyring Convertible Pen Perfume pen and perfume atomizer Cigar Pen Cushion Grip Pen Deco Pen Flat top desk set Flat top fountain pen and pencil 7mm Pen and Pencil Round Top Pen and Pencil Letter Openers Other pen blanks also available Diagonal Pen Blanks Hardwood Pen Blanks
Check out the Jet Pen Lathe . Now you can turn pens and pencils with a smaller, easy to operate system designed exclusively for pen turning!

Hardware includes twist mechanism and replaceable cartridge. Includes all necessary hardware. Requires a 10mm drill bit. Fits 7 mm mandrel shaft. Turning blank not included.

Pen Turning Mandrel System This is the essential tool for pen turning on a lathe! Machined-accurate steel bar is held in the lathe to ensure the pen turns accurately with live center, no drill chuck required!
This Pen Turning Mandrel system includes a #2 morse taper arbor for use with #2 morse taper lathe, mandrel shaft and knurled nut. #1 morse taper arbor attaches to mandrel (#23552) for use with #1 morse taper lathe. 7mm mandrel for use with fountain and rollerball pen bushings. Bushing sets sold separately. Other Pen Turning Kits available: Keyring, and Toothpick Keyring Convertible Pen Perfume pen and perfume atomizer 7mm Pen and Pencil Cushion Grip Pen Deco Pen Flat top desk set Flat top fountain pen and pencil Round Top Pen and Pencil Letter Openers Choose from a variety of pen blanks: Hardwood Pen Blanks Diagonal Pen Blanks Acrylic Pen Blanks
Check out the Jet Pen Lathe . Now you can turn pens and pencils with a smaller, easy to operate system designed exclusively for pen turning!

An elegant place to display your finest collectibles. Great for pens, coins, stamps, political campaign buttons or any other collection you would like to protect and display.

Detail of pen design.
Kit includes all necessary hardware for pen. The 0.5mm lead pencil mechanism sold separately. Fits 10 mm mandrel shaft. Turning blank not included.

Pen Turning Mandrel System This is the essential tool for pen turning on a lathe! Machined-accurate steel bar is held in the lathe to ensure the pen turns accurately with live center, no drill chuck required!
This Pen Turning Mandrel system includes a #2 morse taper arbor for use with #2 morse taper lathe, mandrel shaft and knurled nut. #1 morse taper arbor attaches to mandrel (#23552) for use with #1 morse taper lathe. 10mm mandrel for use with fountain and rollerball pen bushings. Bushing sets sold separately. Other Pen Turning Kits available: Keyring, and Toothpick Keyring 7mm Pen and Pencil Perfume pen and perfume atomizer Cigar Pen Cushion Grip Pen Deco Pen Flat top desk set Flat top fountain pen and pencil Round Top Pen and Pencil Letter Openers Choose from a variety of pen blanks: Hardwood Pen Blanks Diagonal Pen Blanks Acrylic Pen Blanks
Check out the Jet Pen Lathe . Now you can turn pens and pencils with a smaller, easy to operate system designed exclusively for pen turning!

Get a sophisticated high-gloss finish thatÆs also water-and wear-resistant. Quick, easy and no-mess! Perfect for turned pens! Can be applied to wood pens and other turnings right while theyÆre on the lathe! Easy to use 6 ounce bottle. Designed as a final finish coat.
Food safe when dry.

Includes all necessary hardware. Fits 10 mm mandrel shaft. Turning blank not included. Pen Turning Mandrel System This is the essential tool for pen turning on a lathe! Machined-accurate steel bar is held in the lathe to ensure the pen turns accurately with live center, no drill chuck required!
This Pen Turning Mandrel system includes a #2 morse taper arbor for use with #2 morse taper lathe, mandrel shaft and knurled nut. #1 morse taper arbor attaches to mandrel (#23552) for use with #1 morse taper lathe. 10mm mandrel for use with fountain and rollerball pen bushings. Bushing sets sold separately. Other Pen Turning Kits available: Keyring, and Toothpick Keyring Convertible Pen Perfume pen and perfume atomizer Cigar Pen 7mm Pen and Pencil Deco Pen Flat top desk set Flat top fountain pen and pencil Round Top Pen and Pencil Letter Openers Choose from a variety of pen blanks: Hardwood Pen Blanks Diagonal Pen Blanks Acrylic Pen Blanks
Check out the Jet Pen Lathe . Now you can turn pens and pencils with a smaller, easy to operate system designed exclusively for pen turning!

Detail of deco design.
Kits includes all necessary hardware. Pen and pencil hardware kits sold separately. Fits 7 mm mandrel shaft. Requires a 7 mm drill bit. Turning blank not included.
Pen Turning Mandrel System This is the essential tool for pen turning on a lathe! Machined-accurate steel bar is held in the lathe to ensure the pen turns accurately with live center, no drill chuck required!
This Pen Turning Mandrel system includes a #2 morse taper arbor for use with #2 morse taper lathe, mandrel shaft and knurled nut. #1 morse taper arbor attaches to mandrel (#23552) for use with #1 morse taper lathe. 10mm mandrel for use with fountain and rollerball pen bushings. Bushing sets sold separately. Other Pen Turning Kits available: Keyring, and Toothpick Keyring Convertible Pen Perfume pen and perfume atomizer Cigar Pen Cushion Grip Pen 7mm Pen and Pencil Flat top desk set Flat top fountain pen and pencil Round Top Pen and Pencil Letter Openers Choose from a variety of pen blanks: Hardwood Pen Blanks Diagonal Pen Blanks Acrylic Pen Blanks
Check out the Jet Pen Lathe . Now you can turn pens and pencils with a smaller, easy to operate system designed exclusively for pen turning!

Choose from Rosewood, Cocobolo, Apple Jack, Magnum, and Sunrise. Birch veneers are injected with dyes and resins, then compressed under incredible pressure for easy turning. Can be highly polished. All blanks measure 5 long x 5/8 square. Blanks can be finished after turning by sanding with 220 grit sandpaper and then polished to a high luster with a buffing wheel and buffing compound. No further finishing is needed! Each blank is sold individually.
Rosewood Pen Blank #19598 Reddish brown wood tone Cocobolo Pen Plank #19605 Redish orange wood tone
Apple Jack Pen Blank #19621 Layered red and charcoal Magnum Pen Blank # 19613 Layered with rose, yellow, charcoal, cocobolo, and natural Sunrise Pen Blank #19639 Layered with rose, yellow, blue Pen kits also available! Keyring, and Toothpick Keyring Convertible Pen Perfume pen and perfume atomizer Cigar Pen Cushion Grip Pen Deco Pen Flat top desk set Flat top fountain pen and pencil 7mm Pen and Pencil Round Top Pen and Pencil Letter Openers Other pen blanks also available Acrylic Pen Blanks Hardwood Pen Blanks
Check out the Jet Pen Lathe . Now you can turn pens and pencils with a smaller, easy to operate system designed exclusively for pen turning!

Pen hardware includes 7mm pen assembly kit with twist mechanism and replaceable ball point refill. Requires a tenon to be cut for center ring.
Each hardware kit sold separately. Fits 7 mm mandrel shaft. Turning blank not included. Pen Turning Mandrel System This is the essential tool for pen turning on a lathe! Machined-accurate steel bar is held in the lathe to ensure the pen turns accurately with live center, no drill chuck required!
This Pen Turning Mandrel system includes a #2 morse taper arbor for use with #2 morse taper lathe, mandrel shaft and knurled nut. #1 morse taper arbor attaches to mandrel (#23552) for use with #1 morse taper lathe. 10mm mandrel for use with fountain and rollerball pen bushings. Bushing sets sold separately.
Other Pen Turning Kits available: Keyring, and Toothpick Keyring Convertible Pen Perfume pen and perfume atomizer Cigar Pen Cushion Grip Pen Deco Pen Flat top desk set Flat top fountain pen and pencil 7mm Pen and Pencil Round Top Pen and Pencil Letter Openers Choose from a variety of pen blanks: Hardwood Pen Blanks Diagonal Pen Blanks Acrylic Pen Blanks
Check out the Jet Pen Lathe . Now you can turn pens and pencils with a smaller, easy to operate system designed exclusively for pen turning!

Magnifying glass hardware includes 2-1/2 hardened optical acrylic lens and end pieces. Lens contains two small magnifying windows that provide increased magnification.
Letter opener blade measures 3-3/8 long.
Ballpoint pen hardware includes double twist mechanism and replaceable cartridge.
Pencil hardware includes .7mm lead dispenser and twist mechanism.
Each hardware kit sold separately. Fits 7 mm mandrel shaft. Turning blank not included.
The flat top desk set also coordinates well with the flat top fountain pen. Pen Turning Mandrel System This is the essential tool for pen turning on a lathe! Machined-accurate steel bar is held in the lathe to ensure the pen turns accurately with live center, no drill chuck required!
This Pen Turning Mandrel system includes a #2 morse taper arbor for use with #2 morse taper lathe, mandrel shaft and knurled nut. #1 morse taper arbor attaches to mandrel (#23552) for use with #1 morse taper lathe. 10mm mandrel for use with fountain and rollerball pen bushings. Bushing sets sold separately.
Other Pen Turning Kits available: Keyring, and Toothpick Keyring Convertible Pen Perfume pen and perfume atomizer Cigar Pen Cushion Grip Pen Deco Pen 7mm Pen and Pencil Flat top fountain pen and pencil Round Top Pen and Pencil Letter Openers Choose from a variety of pen blanks: Hardwood Pen Blanks Diagonal Pen Blanks Acrylic Pen Blanks

Check out the Jet Pen Lathe . Now you can turn pens and pencils with a smaller, easy to operate system designed just for pen turning!

Detail of fountain pen tip.
Includes all necessary hardware. Fits 10 mm mandrel shaft. Fountain pen and rollerball pen sold separately. Fountain pen accepts converter pump so bottle ink can be used. Turning blank not included. Pen Turning Mandrel System This is the essential tool for pen turning on a lathe! Machined-accurate steel bar is held in the lathe to ensure the pen turns accurately with live center, no drill chuck required!
This Pen Turning Mandrel system includes a #2 morse taper arbor for use with #2 morse taper lathe, mandrel shaft and knurled nut. #1 morse taper arbor attaches to mandrel (#23552) for use with #1 morse taper lathe. 10mm mandrel for use with fountain and rollerball pen bushings. Bushing sets sold separately.
Other Pen Turning Kits available: Keyring, and Toothpick Keyring Convertible Pen Perfume pen and perfume atomizer Cigar Pen Cushion Grip Pen Deco Pen Flat top desk set Flat top fountain pen and pencil 7mm Pen and Pencil Round Top Pen and Pencil Letter Openers Choose from a variety of pen blanks: Hardwood Pen Blanks Diagonal Pen Blanks Acrylic Pen Blanks
Check out the Jet Pen Lathe . Now you can turn pens and pencils with a smaller, easy to operate system designed exclusively for pen turning!

These blanks will turn very smoothly and can be highly polished. All blanks measure 5 long x 5/8 square. Each blank is sold individually.
Spalted Maple #61482 Box Elder Burl #61490
Redwood Burl #61498 Red Maple Burl #61508
Green Maple Burl #61517 Blue Maple Burl #61526 Carol Cherry Burl #12444 Buckeye Burl #12496 Figured Olive #61535 ---> Sample of Finished Pens using Blue Maple Burl Pen kits also available! Keyring, and Toothpick Keyring Convertible Pen Perfume pen and perfume atomizer Cigar Pen Cushion Grip Pen Deco Pen Flat top desk set Flat top fountain pen and pencil 7mm Pen and Pencil Round Top Pen and Pencil Letter Openers Other pen blanks also available Diagonal Pen Blanks Acrylic Pen Blanks
Check out the Jet Pen Lathe . Now you can turn pens and pencils with a smaller, easy to operate system designed exclusively for pen turning!

HUT Lite gives a satin finish to lighter woods such as maple, birch, and pine without darkening their color. It removes fine scratches and gives a final durable finish in one step. 4 oz. bar.

This finish is designed specifically for applying to wood pens or other wood turnings as they are spinning on the lathe. Use the satin gloss block for an easy-to-apply finish to your pens or pencils. For a gloss finish, first use the satin gloss block followed by the high gloss block. Creates an instant durable finish. No drying time required.
Non-toxic.
2 ounces.

Jet Mini LatheHeavy duty cast iron construction ensures stability with virtually no vibration.With six speeds ranging from 500 to 3,957 RPM every wood turner can use this lathe for their small projects.Larger capacity than most other mini lathes- 10'' over the bed and up to 14'' spindle capacity. Large 5'' tool rest.1/2 HP motor delivers all the power needed when turning any small project.

Includes all necessary hardware. Fits 10 mm mandrel shaft. Wood blank not included.
Detail of Round Top Letter Opener Round top letter opener coordinates with round top pen and pencil set. Pen Turning Mandrel System This is the essential tool for pen turning on a lathe! Machined-accurate steel bar is held in the lathe to ensure the pen turns accurately with live center, no drill chuck required!
This Pen Turning Mandrel system includes a #2 morse taper arbor for use with #2 morse taper lathe, mandrel shaft and knurled nut. #1 morse taper arbor attaches to mandrel (#23552) for use with #1 morse taper lathe. 10mm mandrel for use with fountain and rollerball pen bushings. Bushing sets sold separately.
Other Pen Turning Kits available: Keyring, and Toothpick Keyring Convertible Pen Perfume pen and perfume atomizer Cigar Pen Cushion Grip Pen Deco Pen Flat top desk set Flat top fountain pen and pencil Round Top Pen and Pencil 7mm Pen and Pencil Choose from a variety of pen blanks: Hardwood Pen Blanks Diagonal Pen Blanks Acrylic Pen Blanks
Check out the Jet Pen Lathe . Now you can turn pens and pencils with a smaller, easy to operate system designed exclusively for pen turning!

Micro-Mesh (Grades 1500 through 12000) was originally designed to polish most hard plastics, fiberglass, epoxy, gel-coat, raw and finished wood, cultured marble, sold surface, painted surfaces, gold, silver, etc. Micro-Mesh is not an aggressive stock remover. Common sandpaper products are required for the removal of deep scratches prior to using Micro-Mesh to polish the surface back to clarity or a high gloss.
Use wet or dry with either water or water/detergent as a lubricant. You may also use mineral oil, vegetable oil, lemon oil, etc but DO NOT use anything containing solvent as this will delaminate the MICRO-MESH.
Sheets are offered in the following Micro-Mesh grades: 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000, 12000

Ideal for gift giving and sales presentations.

Pen Mill is used with the Universal Mandrel to clear excess glue from tubes. Use the pen mill to clear excess glue from tubes prior to using mandrel. Use with 7mm pens only.

Use the pen mill to clear excess glue from tubes prior to using mandrel. Use with 7mm pens only. Pictured on right in picture.

This Pen Turning Mandrel system includes a #2 morse taper arbor for use with #2 morse taper lathe, 7 mm mandrel shaft and knurled nut. #1 morse taper arbor adapter attaches to mandrel (#23552) for use with #1 morse taper lathe. 10mm mandrel available for use with fountain and rollerball pen bushings. Bushing sets sold separately.
Pen Mill is used with the mandrel to clear excess glue from tubes. Use the pen mill to clear excess glue from tubes prior to using mandrel. Use with 7mm pens only.

This is the essential tool for pen turning on a lathe! Machined-accurate steel bar is held in the lathe to ensure the pen turns accurately with live center, no drill chuck required!
This Pen Turning Mandrel system includes a #2 morse taper arbor for use with #2 morse taper lathe, 7 mm mandrel shaft and knurled nut. #1 morse taper arbor adapter attaches to mandrel (#23552) for use with #1 morse taper lathe. 10mm mandrel available for use with fountain and rollerball pen bushings. Bushing sets sold separately.

Dick Sing
Size: 8 1/2'' x 11''
Illustrations: 273 photos
Pages: 64
These unique writing instruments are fantastic sellers at art and craft shows, cherished treasures for family, and fabulous gifts. Kits to make a variety of styles are widely available, but the techniques to make a pen which works well and looks spectacular are harder to find.
This book fills the need with 273 step-by-step color photos and helpful text. Skilled wood turner Dick Sing provides detailed instructions and a wealth of tips and techniques for twelve different styles of pens. Advice on selection of materials, set-up, turning, and finishing techniques, and tips for final assembly of the pens make this book the ultimate reference for the field.

Applicator has rubber gasket seals to prevent evaporation and leakage. Atomizer includes spray container and pump mechanism. Applicator and atomizer sold separately. Each includes all necessary hardware. Applicator uses a 5/16'' drill bit and the atomizer uses a 19/32'' drill bit. Fits 7 mm mandrel shaft. Turning blank not included.

Pen Turning Mandrel System This is the essential tool for pen turning on a lathe! Machined-accurate steel bar is held in the lathe to ensure the pen turns accurately with live center, no drill chuck required!
This Pen Turning Mandrel system includes a #2 morse taper arbor for use with #2 morse taper lathe, mandrel shaft and knurled nut. #1 morse taper arbor attaches to mandrel (#23552) for use with #1 morse taper lathe. 10mm mandrel for use with fountain and rollerball pen bushings. Bushing sets sold separately. Other Pen Turning Kits available: Keyring, and Toothpick Keyring Convertible Pen 7mm Pen and Pencil Cigar Pen Cushion Grip Pen Deco Pen Flat top desk set Flat top fountain pen and pencil Round Top Pen and Pencil Letter Openers Choose from a variety of pen blanks: Hardwood Pen Blanks Diagonal Pen Blanks Acrylic Pen Blanks
Check out the Jet Pen Lathe . Now you can turn pens and pencils with a smaller, easy to operate system designed exclusively for pen turning!

WeÆve taken the hassle out of turning pens with our new ready-to-turn pen blanks. (Colors above shown on Cigar Pen).Just flush out the ends of the blanks to the tubes and youÆre ready to turn. Pen blanks available in acrylic (6 hot designs!) or Bubinga wood. Choose from Aqua Blue/Black, Fire Red, Bright Green, Blue/White, Burgundy/Black, Pearl Violet and Bubinga.Includes top and bottom blanks.Pen hardware kit, bushing and #2 morse taper mandrel with knurled nut sold separately.Hardware kit features gold-plated exterior trim with black accents and include all necessary hardware. Other Pen Turning Accessories Euro Pen Style 7mm Pen Style Cigar Pen Style Mini Pen Lathe