Adjusts for a perfect fit in your saw's miter slots. Great for crosscut sleds or frame jigs. Adjustable ball bearings keep bar snug. Measures 18'' long x 3/4'' wide x 3/8'' deep.

Starts accurate, stays accurate!This rip fence is designed to give you a lifetime of precision through even the toughest working and continuous use conditions! Because the locking device and metal contacts are CNC machined, less pressure is needed to hold the fence in place. Fence rails can be cut down if needed or mounted to give you more left blade ripping capabilities. For ripping extremely thin materials or doing cut work to exact length without the need for clamp on stop blocks, add the fully adjustable cross and thin rip attachment (sold separately). The cross-cut and thin-rip attachment enables you to cut thin materials like plastic laminates without allowing them to slip under the fence. It also works great as a stop block when cross cutting!

Test table saw alignment, arbor shaft runout, blade and flange runout, and rip fence alignment and straightness. Manually adjustable miter bar and leveling knobs adjust for any miter groove depth. Reconfigures in seconds to test table saw alignment, arbor shaft runout, blade and flange runout, and rip fence alignment and straightness.Also checks jointers and planers.With manually adjustable miter bar and leveling knobs that adjust for any miter groove depth.Includes 3/4" x 3/4" indicator mounting bar, 3/8" x 3/4" miter groove bar with leveling knobs, dial indicator, 3/32" and 3/16" hex keys, and screws.

Lights up when your angle is perfect.
YouÆll know for a fact when youÆre at a perfect 45 or 90 angle because the light goes on. Accurate to within +/- .002. Printed circuit board. Lithium battery. Magnetized nickel base.
Combo Deal - Purchase both #24544 Angle Perfect Blade Gauge and #24553 Electronic Blade Gauge for a special price of $79.99

Yellow wheels turn clockwise to prevent kickback on table saws and router tables.Mounts to fences 3" to 3-1/2" high x 1" or wider.Sold in pairs.Optional track allows you to easily move Board Buddies from one machine to another.Track shown sold separately

Designed for table saws with 3/8'' X 3/4'' grooves. Stop block and hold down clamp are included for ease of control. Also comes with instructions for doing raised panel doors.

Features comfortable D-handle grip, built-in sliding stop and positive trigger clamping action.Fits standard 3/8" x 3/4" miter gauge slots.With positive angle stops at 90║ and 45║ both left and right side.Bar extends to 12".

Electronic Blade Gauge
Led indicator tells you when youÆre at the right height.A light lets you know that the bladeÆs made contact with the gauge! 1/8'' to 2'' in 1/8'' increments. Magnetic base keeps gauge perpendicular to table.
Combo Deal - Purchase both #24544 Angle Perfect Blade Gauge and #24553 Electronic Blade Gauge for a special price of $79.99

The base has 6-1/2" ruler graduated in 1/16" increments.High strength filled ABS plastic.Available for left-tilt or right-tilt saws.

With a strong magnetic base, youÆre assured of a safe, reliable hold through the entire cut! The hardwood handle and magnetic base give you an extra measure of safety, especially when working with short and thin pieces. ItÆs totally tool-free without knobs to tighten. Just place the featherboard in the proper position and youÆre ready to go!

Safety, accuracy and repeatability are the hallmarks of this heavy-duty tenoning jig. Designed to fit any table saw with a 3/4'' X 3/8'' miter groove, this jig will hold your stock in the precise position. The adjustable back stop will support stock from 0 degrees to 45 degrees. The width of the cut is controlled with a fine-threaded adjustment knob. Constructed of cast iron and steel.

Miter Express Video Demo">
For extra-large crosscuts, the non-drag support provided by the sliding panel ù along with the extra holding power of the included hold-down clamps ù adds stability and control. Incra hold-down clamp keeps your fingers away from the blade when cutting small workpieces. Includes outboard fence support that locks behind your fence in T- slot to provide even more rigidity for all operations. Instantly removable from your table saw when making rip cuts or other operations that don't require a sled. Safely handles large and extra small workpieces. Excellent crosscut and mitering control. Comes with hold-down clamp and aluminum miter bar. With quick-release feature. Works with any miter gauge in your shop!
The sliding main panel and the locking drop-off support panel are each trimmed with one simple cut during assembly for a perfect fit on YOUR table saw. The result is true Zero-Clearance Tearout Control on BOTH sides of the blade. The Miter Express is instantly removable from your saw table when making rip cuts or other operations that don't require a sled. And thanks to INCRA's quick release feature, your miter gauge undocks from the Express in seconds whenever you want to use your gauge on another tool such as a router table or sanding station. The Miter Express also includes the new Incra Hold Down Clamp. This makes miter cuts on small pieces more accurate and secure than ever before while keeping your fingers safely away from the cutter. You can Dock and Lock ANY BRAND of miter gauge in seconds. Removing your gauge is just as easy. Simply release three locking screws and lift your gauge out cleanly. There is absolutely no modification required to your miter gauge for this speedy lock and release feature.
The Miter Express features removable front and rear T-Slot Retaining Clips for sled stability at both the beginning and end of long crosscuts.

Miter Slider comes with FREE illustrated plans to make popular table saw jigs, such as the miter jig shown above. Includes illustrated plan to make a crosscut box, which firmly supports the stock off the table surface for a smooth cut while maintaining a perfectly square cut. Create your own jig designs! Miter Slider is ideal for use with a featherboard to push the stock firmly against the rip fence. Make your own featherboards, small and large crosscut boxes, 45║ miter jig and your own jig designs.WonÆt warp, swell or shrink (unlike wooden runners), so the jigs you build will fit perfectly time after time.With easy to adjust width.Universal threaded mounting holes.Comes with FREE illustrated plans for making a variety of table saw jigs.

Adjustable scale allows accurate measurements out to 36''. Fence extends out to a maximum cut length of 36'' with stop. Flip stop has interlocking design that seats into grooves in the fence face. Quick and easy fence adjustablity with solid brass lock knobs. Brass locator pins are used together to achieve a variety of angle locations down to 1/2 degrees. Miter gauge pivots 45║ in both directions and allows you to index positive stops every 1/2 degree.Separate vernier scale allows additional angle settings to 1/10 degree.Heavy-gauge 24" extruded aluminum fence extends to 36" overall.Adjustable dual-reference scale provides accurate cutting measurements between the 27" and 36" telescoping fence extension.20" solid steel bar with T-slot washer fits standard 3/4" miter slot.Adjustable snugger bar eliminates slop.Adjustable flip-stop seats into grooves in the fence face for accurate positioning of workpiece.With solid brass lock knobs and multiple T-tracks for zero-clearance crosscuts.Precision CNC machined from solid aluminum.

Straighten any length of lumber using your table saw.
It's never been easier or more economical to make straight and even edges on any size stock. No need buy a jointer, with the Joint'R Clamp Kit, all you need is your Table Saw. Simply attach to a straight board that has been rabbeted out at the bottom, clamp it to your stock and go! Straighten crooked boards, true-up rough-sawn edges, and make shallow taper cuts with positive control all in one pass with your Table Saw and Joint'R Clamp.

Tune up your table saw to the peak of perfection.
Get the highest degree of accuracy with this combination Master Plate and Super Bar. Together, they help you tune-up, calibrate, and align your table saw to within 1/1000 of an inch! What's more, it promotes safer operation by helping to eliminate kickbacks, sticking, and binding. The master plate is made of solid 1/4'' thick, flat-ground aluminum. It replaces your saw blade and bolts into a 5/8'' or 1'' arbor to provide a full 10'' of near-perfect flatness for aligning your equipment. The Super Bar jig has an-onboard precision dial indicator that measures alignment as it slides in the miter gauge slot. This enables you to keep the saw blade parallel, align the fence, square tour protractor, and check runout on routers, drill presses, and more!

This 15 amp, 10'' Portable Table Saw works where you do; with a base designed for bench, stand, or job site 2 x 4 sawhorse mounting. Along with a powerful motor, this saw features an electric brake; under-table storage; includes a Riptide 24T carbide-tipped blade, premium miter gauge, rip fence, quick-release blade guard, and blade wrenches. It can also accommodate 13/16'' dado sets. On top of a generous 26'' x 20'' table surface, the extra-wide 24-1/2'' rip capacity allows for easy ripping of 4' x 8' plywood sheets. Add the optional Quick Folding Stand, Outfeed Material Support, and Dado Throat Plate Insert for maximum performance anywhere, anytime!

Turn your tools into smooth operators!
Reduce vibration on table saws, drill presses, and other tools by as much as 35 with this unique belt. Whereas traditional belts can stretch and become misshapen (creating vibration as they rotate), the Power Twist Link Belt is made up of interlocking segments of polyurethane elastomer and multiple plies of polyester fabric that retain their original shape, thereby reducing vibration. What's more, you can easily add or subtract links to get optimal tension on most machines!

Automatically gives you a perfect miter every time. Cut one angle on the left face of the square and, without making any adjustments, cut the opposite piece on the right face for a perfect 90 miter. Auxiliary wood fences can be attached to the square for longer lengths of material. For table saws with a 3/4'' x 3/8'' slot.

Designed to fit all standard 3/4'' X 3/8'' miter slots, as well as the sears .740 slot, the SuperBar table saw gauge creates workshop safety and helps keep your table saw, radial arm saw, chop saw, and sliding compound miter saw in perfect shape! Outrigger rods give you maximum operation stability. Includes precision dial indicator with hex wrench for installations, plus hex wrench for adjustment screws.

---> View a "Flash" animation for our Sure-Loc Miter Gauge
New and Improved Sure-Loc Miter Gauge
The ''poker chip'' design of our miter gauge head assures dead-on accuracy. And with our new 1-1/2 degree increments, you can cut at virtually any

COMPARE PERFORMANCE & PRICE WITH ANY FENCE!Being able to cut materials safely and precisely on your table saw is essential for fast and accurate Woodworking. Unless saw fences are well designed they make cutting a chore instead of pleasure, resulting in poor quality and inaccurate cuts. Most Saw Fence Systemsà. Do not lock parallel to saw blade. Do not have accurate measuring scales. Have Fence Bars that are too short. Do not have adequate width ripping capacity. Require frequent re-alignment. Lack safety devices. Are unable to be finely adjusted.
The Vega Saw Fence Systems solve all of these problems (and more!) to assure Accurate and reliable cuts combined with smooth, precise motion.
UTILITY MODEL 26 or 50 Designed for contractors saws, smaller cabinet saws, and 10" saws that don't receive extremely heavy use, the Utility Model Fence is simply a small version of the very successful Professional Model. With all the great features of the Pro Model (fast installation, super precision, micro adjustments and more), the Utility Fence will upgrade your saw to a very precise cutting machine at a very reasonable price.
The Utility Model Vega Saw Fence System is available with 26" or 50" rip capacity to the right of the blade and 8" to the left.
Vega Fence Model FAQ