Features Powerful, 1/2HP, 120V motor for long lasting, smooth. Manual brake stops sanding disc in seconds. Heavy-duty, steel disc plate features a 12" diameter, 80-grit abrasive disc for fast, efficient sanding. Tilting cast-iron table with 90 degress and 45 positive stops locks in position with spring-loaded, table-locking handles. Cast-iron base with pre-drilled base holes for quick and easy bench mounting. Dust hose with 2 1/4" I.D. connectors attaches quickly to any standard shop vacuum. Integral dust collection fan draws dust away from table and into hose for cleaner sanding operation. The Delta 12" Disc Sander features a 3/8" X 3/4" miter gage slot machined into the table for projects that require sanding an angle or straight edge. Additional Specifications Motor 1/2 HP Disc Diameter 12" MOTOR 1/2 HP SPEED Belt: 1971 SFPM (601 SMPM) Disc: 2500 rpm DISC DIAMETER 12" TABLE Size: 17 1/4" X 6 1/4"(438 X 159 mm) Tilt:45 up and down Miter Gage Groove: 3/8" X 3/4" OVERALL DIMENSIONS Height: 15"(381 mm) Depth: 17 3/4"(451 mm) Width: 17 1/4"(438 mm) WEIGHT 72 lbs.(33 kg)

Features Powerful, 1HP, induction motor is totally enclosed for protection against damaging dust. Adjustable belt unit operates vertically, horizontally or at any angle in-between. Belt guard removes easily for contour sanding. Cast-aluminum table with miter gage slot tilts 45 for bevel sanding and may be used on either the belt or disc unit. Die-cast aluminum base minimizes operating vibration. Abrasive belt rotates on steel platen with smooth replaceable graphite pad for extra-smooth belt rotation and longer belt life. Belt tracking knob offers operator the convenience of "tool-free" belt alignment. Built-in, 2 1/4" diameter dust outlet for hook-up to dust collection system. Sturdy steel stand with foot pads for greater operating stability and less operating vibration. Power take-off spindle lets you add on accessory flex shaft for handling a variety of other finishing jobs. Belt tensioning lever loosens and tightens belt instantly for quick belt changes. Large, 9" diameter abrasive disc is perfect for sanding large curves or rounding out sharp corners. Additional Specifications Motor 1 HP Belt Size 6" x 48" Disc Diameter 9" MOTOR 1 HP SPEED Belt: 2200 SFPM (671 SMPM) Disc: 2800 rpm ABRASIVE BELT Length: 48"(1219 mm) Width: 6"(152 mm) DISC DIAMETER 9" TABLE SIZE AND TILT Belt: 6" X 9"(152 X 229 mm) Tilts 45 up and down Disc: 13" X 16"(330 X 406 mm) Tilts 45 up and down OVERALL DIMENSIONS Belt in Vertical Position Depth: 21"(533 mm) Length: 31"(787 mm) Height: 58"(1473 mm) Belt in Horizontal Position Depth: 21"(533 mm) Length: 31"(787 mm) WEIGHT 79 lbs.(36 kg)

Features Large, cast-iron table measures 18" in diameter to support large workpieces. Heavy-duty motor assembly features a powerful, 1/4HP induction motor with direct drive for quiet, smooth operation. Replaceable oil-impregnated bearings and sturdy, ground-steel rods for support. Built-in dust collection fan draws in dust and chips through a specially designed table insert and deposits debris in the standard-equipment dust bag. Pre-droilled base holes for mounting sander to a stand or workbench. Toggle switch with removeable lock out key prevents unauthorized use. Comes complete with table insert for accepting standard-equipment 3/4" diameter sanding drum and sleeve. Four accessory table inserts also available for using sanding drums from 1" to 3" in diameter. Two built-in compartments make it easy to store accessory sanding drums and sleeves. Additional Specifications Motor 1/4 HP Disc Diameter Spindles - 1/2" thru 3"diameter MOTOR 1/4 HP STROKE 7/8"(22 mm) STROKES PER MINUTE 60 DRUM CAPACITY Minimum: 3/4"(19 mm) Maximum: 3"(76 mm) TABLE Size: 18"(457 mm) Insert Opening: 4"(102 mm) Dust Collection Outlet: 1 1/2"(38 mm) OVERALL DIMENSIONS Height: 15"(381 mm) Depth: 18"(457 mm) Length: 18"(457 mm) WEIGHT 45 lbs.(20 kg) Sanding Spindle Set Included
Sanding Spindle Set includes: Includes 1", 1 1/2", 2" and 3" rubber spindles, drum plates, abrasive sleeves and table inserts.

Self-cooling, precision-machined and balanced 5" x 16" extruded aluminum drum Drum operates at 1,725 RPM Continuous-duty, motor allows heavier use for longer periods Precision-flattened reinforced steel conveyor bed No-give power feed conveyor belt Zinc-plated steel tension rollers mount next to the drum Drum height and downward pressure are adjustable, eliminating snipe 1/16" per turn height adjustment Height adjustment handle allows both radical height changes and minute adjustments for extremefy precise sanding thickness control Infinitely variable feed rate from 0 to 10 feet per minute for surface, dimension, and finish sanding Minimum of 400 to 600 CFM dust collection recommended Minimal assembly required Drum ball bearings are sealed and permanently lubricated 20 Amp service required Overload-protected power switch located on front of machine base for easy access

Makes light work of bigger pieces such as counter tops, sink openings, and architectural woodwork. The variable speed control has rotation from 2400 to 3600 rpm and 38 to 60 oscillations per minute. The adjustable edge guide lets you accurately remove material for jointing edges.
Includes 2'' x 4-1/2'' drum, 150 grit sleeve, adjustable edge guide, and vacuum assembly.
High-speed rotating and oscillating actions provide aggressive, burn-free sanding. Lightweight, comfortable, ergonomic hand-held design. Accommodates drum and paper sizes from 1/2'' to 2'' in diameter. Variable speed (2,400 - 3,600 RPM and 38-60 Oscillations per minute), for use on various materials including hard and soft woods, solid surface, laminates, plastics, and marble. Adjustable edge guide allows accurate, pre-set removal of stock during hand-held operation. 1'' vacuum port for dust free sanding. Standard Equipment: Sander, 2'' sanding drum, 150 Grit sanding sleeve, adjustable edge guide assembly, vacuum attachment, and operating manual.
The 3-piece drum set includes 3/4'', 1'' and 1-1/2'' drums.
Additional sanding sleeves sold in packages of 3.
Mounting Plate For Spindle Sander - Lets you insert the Porter Cable Oscillating Spindle Sander (above) into the Rockler Woodworking and Hardware Router Table. 1/4'' anodized aluminum.

Variable speed from 2,100 to 6,000 strokes per minute for added control of your removal rate50% increase in stroke length for added removal capabilityStandard Equipment: Sander, standard hook & loop sanding pad #14444, single profile mounting plate #14445, offset profile mounting plate #14446, complete set of 9 different sanding profiles, assorted profile sanding sheets, carrying case, and operating manual. Specifications Power 120 VAC, 25-60 HZ Motor Amps 1.1/1.8 Speed (SPM) 2,100-6,000 Length (Inches) 11.375 Height (Inches) 5.75 Net Weight 3.75 Lbs. Shipping Weight 6.5 Lbs.

Model 333K Special S.A.P.A. (Self Aligning Paper Applicator) feature built into the case. Includes a blow-molded carrying case. 2.4 Amp, AC onlyFor 5'' hook & loop abrasives (5 hole)3/32'' orbit12,000 OPMSANDTRAP« dust collection canisterDust canister rotates 360░ around sander1'' O.D. vacuum ready100% ball bearingsPad control feature prevents pad spin-up when tool is lifted off workStandard Equipment: Sander, sanding disc, filter, carrying case and operating manual. FEATURES Power 120 VAC, 25-60 HZ Motor Amps 2.4 Speed 12,000 Abrasive Type Hook and Loop (5 or 8 hole) Tool Height 6-1/4 Net Weight 3.5 Lbs. Shipping Weight 4 Lbs.

Comfortable, easy-grip outer housing for hours of use without fatigue Solid metal frame for precision seating and alignment of bearings, motor, and fan, providing the maximum in long, trouble-free tool life Rubber posts isolate your hand from vibration while enabling full sanding action and efficiency on the work. The result is the smoothest finishing sander available today All-ball-bearing construction 14,000 orbits-per-minute pad speed, with aggressive 5/64'' orbit Accepts both adhesive-backed and standard sandpaper Standard Equipment: 120 grit abrasive sheet, clamp tool #846372, and operating manual

Model 333VSK Special S.A.P.A. (Self Aligning Paper Applicator) feature built into the base. Includes a blow-molded carrying case. 2.4 Amp, AC only For 5" hook & loop abrasives (5/8 hole) 3/32" orbit 5,000-12,000 OPM Dust canister rotates 360 around sander 1" O.D. vacuum ready 100% ball bearings Pad control feature prevents pad spin-up when tool is lifted off work Standard Equipment: Sander, sanding disc, filter, carrying case and operating manual. FEATURES Power 120 VAC, 25-60 HZ Motor Amps 1.4/2.4 Speed 5,000-12,000 Abrasive Type Hook and Loop (5 or 8 hole) Tool Height 6-1/4 Net Weight 3.5 Lbs. Shipping Weight 4 Lbs.

It saves time, and extends the life of your sandpaper disks
Now you don't need to turn your sander on and off each time you need to reposition your work. Instead, let it land on the Sander Sitter! While it sits, you're free to work--and your sandpaper disk gets gently cleaned by the crepe pad.Replacement crepe disk pads are also available, sold separately. Lets you go from this to this in about than 5 seconds.