Includes Model #22-580 basic machine with: Motor - 15 Amp, 120 V, single phase, 60 Hz. 2-Knife cutter head with index pins Cutter head wrench Blade magnet Instruction manual Woodworking 101 Planer/Jointer Instructional Video
Features 2-Speed material feed rate system (Diameter of Feed Rolls are 1 - 3/8'') Patented cutter head lock stabilizes cutter head to virtually eliminate snipe High-speed double-sided knives Full range depth stop for repeatable thickness at any dimension across the entire height range. Blade zero indicator sets the cutter head to the exact thickness of the material Motor Control - Oversized On/Off switch with Lock Out
Cutter head Diameter - 2'' 2 double-sided knives RPM (no load/load) - 10,000 RPM/8,000 RPM Finishing speed/Feed Rate - 90 CPI/14.8 FPM Dimensioning speed/Feed Rate - 60 CPI/22.4 FPM
Capacity Max. Width of Stock - 13'' Max. thickness of stock - 6-1/2'' Max. depth of cut on 6'' board - 1/8'' Max. depth of cut on 13'' board - 1/16'' Min. length of unbutted stock - 10''
Overall Dimensions Depth - 27.75'' Width - 17.50'' Height - 23.25'' Weight - 97 lbs.

Powerful 15 amp, 120V motor for superior stock removalTwo-knife, quick change, solid steel cutterhead mounted on ball bearings assures smooth operation and long lifeHigh-speed steel, double-edge/reversible knives included for twice the cutting lifePatented cutterhead elevation on four precision-ground columns for superior cut stability Poly-V belt cutterhead drive with rugged gearbox/chain & sprocket feed roller drive for maximum power transmissionConvenient wood return rollerAdjustable infeed/outfeed tablesEasy to read English/Metric scale

ADDITIONAL SPECIFICATIONS:Motor 15 amp, 120V, single phase, 60 HzMax. Width of Stock (in.)12 1/2Cutting CapacityThickness: 6'' maximum; 3/16'' minimumDepth of Cut: 3/16'' maximumLength of Stock: 12'' minimumFeed Rate (ft./min.)26.2Cutterhead Number of Knives: 2 double-edged reversible, quick change Speed: 8,000 RPM; 16,000 CPM Diameter: 2''Feed Rolls Diameter1 3/8''Table Size with Extensions 12-1/8'' x 26''Overall DimensionsHeight: 15'' Width: 20 1/2''Depth: 23 3/4''Weight: 62 lbs.

Extra large table provides ample work support for surfacing stock up to a full 6'' wide.
Center-mounted fence gives needed support throughout the cut for accurate edge jointing.
Fence tilts 0 to 45 outward for bevel jointing & chamfering; features positive stops at 45 90.
Wide range of speeds allows you to select the right speed for the size and hardness of the material youÆre cutting. Variable 6,000 to 11,000 rpm speed range. Poly-V belt drive for maximum transmission of power to cutter head with minimum belt slippage. Balanced aluminum ball bearing cutter head for smooth operation; maintenance-free life. Two-knife cutter head with jack-screw knife leveling arrangement for easy replacement and adjustment of individual knives. Built-in cutter head lock to facilitate knife replacement and adjustment. Convenient in-feed table raising/lowering control with dual English/Metric scale to facilitate depth of cut adjustment; lock knob securely holds desired setting. Built-in chip chute directs dust and chips away from operator, motor and electricals. Rubber base pads, to minimize operating vibration; dampen noise level.
Model 37-070 6'' Variable Speed Bench Jointer. Includes basic machine with 10 amp., 120V, 60 Hz., motor; 2-knife cutter head, cutter head guard and lock, center-mounted fence, push blocks, wrenches and instruction manual.
Motor- 10 amp., 120V, 60 Hz., AC Cutting Capacity: Max. Width- 6-1/8'' (156 mm) Max. Depth- 1/8'' (3 mm) Cutter head: Number of knives- 2 Speed- Variable, 6,000 to 11,000 rpm 12,000 to 22,000 cuts per minute Table size- 6-3/16'' x 30'' (157 x 762 mm) Fence: Size- 4-1/4'' x 19-3/4'' (108 x 502 mm) Tilt- 45 out Positive stops- 90 and 45 Overall Dimensions: Height- 13-1/2'' (343 mm) Width- 18'' (457 mm) Length- 30'' (762 mm) Weight- 35 Lbs. (16 kg) ----> Variable 6,000 to 11,000 rpm speed range allows you to select the right speed for the size and hardness of the material you're cutting. Center-mounted fence gives needed support throughout the cut for accurate edge jointing. Fence tilts 0 to 45 outward for bevel jointing & chamfering; features positive stops at 45 & 90. Poly-V belt drive for maximum transmission of power to cutterhead with minimum belt slippage. Balanced cutterhead for smooth operation and maintenance-free life. Two-knife cutterhead with jack-screw knife leveling arrangement for easy replacement and adjustment of individual knives. Built-in cutterhead lock facilitates knife replacement and adjustment. Convenient, infeed table raising/lowering control with dual English/Metric scale facilitates depth of cut adjustment; lock knob securely holds desired setting. Built-in chip chute directs dust and chips away from operator, motor and electricals. Rubber base pads minimize operating vibratoin and dampen noise level. Extra-large table provides ample work support for surfacing stock up to a full 6" wide. Specifications Motor 10 amp WEIGHT 35 lbs.(16 kg) Cutting Capacity (max. width) 6 1/8" Cuts Per Minute 12,000-22,000 MOTOR 10 amp CUTTING CAPACITY Max. Width: 6 1/8"(156 mm) Max. Depth: 1/8"(3 mm) CUTTERHEAD Number of knives: 2 Variable Speed 6,000 to 11,000 rpm 12,000 to 22,000 cuts per min TABLE Size: 6 3/16" X 30"(157 X 762 mm) FENCE Size: 4 1/4" X 19 3/4"(108 X 502 mm) Tilt: 45 out Positive stops: 90 and 45 OVERALL DIMENSIONS Height: 13 1/2"(343 mm) Length: 30"(762 mm) Width: 18"(457 mm)

Fits portable planers from DeWalt, Delta Ridgid, Ryobi, Craftsmen and others.
Features absolute measuring mode with memory and incremental mode that re-sets to 0.000" or 0.00 mm. Calibrates in seconds.Fits portable planers from DeWalt, Delta, Ridgid, Ryobi, Craftsman and more.Mounts in minutes.Includes readout, stainless steel scale, graphic scale sticker, battery, sheet metal mounting parts, hardware and manual.

The Fisch Electric Log Splitter is the first electric log splitter on the market. It features a 4 ton maximum force, a 2 HP 110V/60Hz single phase motor, and ram travel of 20 -1/2''. Best of all, itÆs less expensive than gas powered log splitters with similar capacity!
Wide-track wheels let you move it from site to site with ease and at a compact 39'' Long X 11'' Wide X 18 - 1/2'' High, itÆs also easy to store in an upright position.
95 lbs.