New and improved brad nailer has 14 amps of nail driving power and now shoots up to 1-1/4" brads!With solid state circuitry, built-in 10-foot cord, jam-proof delivery system and two safety locks (trigger and surface).No air compressor needed!Features hardened carbon steel working parts and easy-access front end latch.Comes in durable molded plastic case.Pack of 2000 1-1/4" brad nails sold separately.

Uses standard 16 Ga. Finish nails from 3/4'' to 2-1/2'' long (will accommodate 3/4'' to 1-1/4'' with supplied magazine insert Special hardened driver blade Depth-of-drive adjustment to match application Quick-release nosepiece Removable rubber safety nose Strong and light weight die-cast body Ergonomic handle with rubber grip Muffled, adjustable exhaust port Rugged top-load aluminum magazine Includes nailer, magazine insert to adapt for 3/4'' to 1-1/4'' nails, 1/4'' male quick coupler with dust cover, OSHA/ANSI approved safety glasses, rugged carrying case with provision to store 2,500 nails, box of 1000 finish nails of 2'', oil and allen wrenches, and operating manualModel FN250B Streamlined body design for better grip, balance, and style. Sturdy aluminum extruded magazine Internal piston catch mechanism keeps piston at initial position - for consistent power Tool-free nail depth control with detents Tool-free jam release mechanism designed not to block line of sight Tool-free adjustable exhaust Non-marring nose tip with on tool storage Standard Equipment: Nailer, case, box of 1000 finish nails of 2'', 1/4'' plug with cap, oil and operating manual Specifications Fastener Type (Inches) 16 Ga. Finish Nails Shipping Weight (Lbs.) 8 Fastener Range (In) 3/4 to 2-1/2 Magazine Capacity 100 Nails Jam Clearance Side Lever Type Quick release Nose Operating Pressure 70-120 psi Firing Modes Sequential Fire Height (Inches) 10-3/4 Length (Inches) 11-3/4 Weight (Lbs.) 3-3/4

Uses standard 18 Ga., 1/4'' crown staples from 1/2'' to 1'' long Special hardened driver blade with quick-release nosepiece Sequential fire trigger Strong & light weight die-cast aluminum body Safety located behind driver guide for stapling in tight spaces Depth adjustment for exact setting of nail head Removable rubber nose protects delicate work Directional exhaust port Standard equipment: 1/4ö male quick coupler with dust cover, carrying case with provision to store 5,000 staples, box of 1,000 staples, oil, allen wrenches, and operating manual

Features Model BN200A Uses standard 18 Ga. Brad nails from 3/4" to 2"Special hardened driver bladeTool-free jam release mechanism designed not to block line of sightSequential fire triggerStrong & light weight die-cast aluminum bodyHard coat anodized magazine with visual reload indicatorTool-free depth-of-drive adjustment for exact setting of nail headRemovable rubber nose cushion and directional tool-free exhaust portSafety located behind the driver guide for driving brads in tight spacesStandard Equipment: Nailer, 1/4" male quick plug with dust cover, rugged carrying case, box of 1000 brads, oil and operating manual Additional Specifications Fastener Type (Inches) 18 Ga. Brad Nails Shipping Weight (Lbs.) 8-3/4 Fastener Range (Inches) 3/4 to 2 Magazine Capacity 100 Brads, Visual Reload Indicator Jam Clearance Lever Type Quick Release Nose Operating Pressure 70-120 PSI Firing Modes Sequential Fire Height (Inches) 9-5/8 Length (Inches) 10-1/8 Weight (Lbs.) 2-3/4

16 Ga. Finish Nailer with: Quick-release nose piece Hardened driver blade Sequential fire trigger Depth-of-drive adjustment Durable, top-load magazine Muffled, adjustable exhaust port 2 HP, 6 Gal. Pancake Compressor with: 15 Amp, 120 VAC, 2 HP motor Oil-free design for less maintenance Ability to run on standard household current 3.7 SCFM40 psi- 2.7 SCFM 90 psi
Includes nailer, compressor, 25, 300 psi air hose with ferrules on both ends,1/4 male and female couplers, Teflon pipe joint tape, 1000 finish nails, oil,wrenches, safety glasses, and operating manuals