The beadLOCK system is a dream to work with and delivers perfect mortise and tenon joints every time. Aside from their patented jig, the only tool required is a drill - no more chisels, mortising machines, table saw jigs or endless shaving to get that exquisitely cut joint. Just cut your stock to size and draw a witness mark across both pieces at the joint center, clamp the jig to each part with the jig at the ''A'' setting, switch to the ''B'' setting and drill. Finish by cutting the pre-milled tenon stock (with maximum side-grain gluing surface!) to length and check the fit. Now your ready to glue up!
Choose from two different Kits!
Deluxe Beadlock Kit This kit comes complete with a 3/8'' and 1/2'' jig, 2 feet each of 3/8'' and 1/2'' tenon stock, shims and complete instructions.
3/8'' Beadlock KitThis kit contains a 3/8'' beadlock jig, 2 feet of tenon stock, shim set and complete instructions.
Extra tenon stock is sold in packages of 3 each 1 foot pieces.

You can also make your own beadLOCK tenon stock in any wood species you desire with the beadLOCK tenon bits.
See more on the beadLOCK bits.

Pulls off perfectly aligned drawer pulls and knobs time after time.
Get the highest degree of accuracy in knob and pull placement -- and protect your investment in drawers and doors -- with the JIG IT for Drawer Pulls and Knobs. The marking template offers spacing for boring of 2-1/2 inches, 3 inches, 3-1/2 inches, 4 inches, and the European 96mm size. The handle lets you adjust your setback from the edge anywhere up to 5 inches, giving you positioning flexibility.
Our Center Punch is sized and designed for use specifically with this template. It indents the wood for perfect drill-bit alignment (and perfectly straight knobs and pulls!) every time.
The JIG IT template, along with the Automatic Center Punch, ensures that you can achieve professional results quickly and easily on either assembled or unassembled doors and drawers! (JIG IT for Drawer Pulls and Knobs is a marking system, and not intended for drilling.)

We've developed the best system on the market for installing slides! JIG-IT is a innovative template system that delivers quick, easy and accurate installation on slides. All of our JIG-IT for drawer slides are available in the offering for each specific series of slides. A single JIG-IT works for the entire series. You'll be impressed at how quickly and precisely the template locates mounting holes. Each JIG-IT is constructed from durable laser cut acrylic that will last for years. JIG-IT Templates work with self centering bits for perfectly centered holes. Use the template for both inset and overlay drawer applications.
Note: Jig-It will not work with extra long slides 26'' and 28'' lengths.

Simply align your fence with the jig and drill. You'll get consistently accurate holes set to the proper depth and the ability to position quickly and easily!
Hinge Cup Jig A is used on these hinges:Blum 125 Clip On Face Frame Hinges100 Blum Clip On HingesBlum 170 Clip-On HingeBlum 125 Clip HingeBlum 165 Zero Protrusion Snap Closing HingeBlum Thick Door Clip-On Snap Closing 35mm HingesBlum 125 Clip On Face Frame HingesBlum 110 Cross-Corner HingesBlum 95 Blind-Corner Hinges
Hinge Cup Jig B is used on these hinges:Blum Nickel Plated Face Frame HingesMepla Antique Brass Edge Mounted Face Frame Hinges
Hinge Cup Jig C is used on these hinges:Mini Blum Clip-On Hinges
Hinge Cup Jig D is used on these hinges:Blum Bi-Fold Hinge

Our innovative JIG IT System lets you quickly and easily locate, center and a drill cup holes on cabinet doors for fully concealed hinges. The Concealed Hinge JIG IT is ideal for drilling individual hinge cup holes. To drill the mounting plate holes, use our Mounting Plate JIG IT template to accurately positions holes for mounting plates. Concealed Hinge JIG IT
The Concealed Hinge JIG IT Drills concealed hinge cup holes individually. Perfect for smaller jobs where accuracy is needed, but set up is not a concern.
Package includes an alignment plate, bit guide, spring, stop collar and clamp. Drill bits and mounting plate JIG IT templates sold separately. Choose from (4) Long Shank Carbide Hinge Cup Forstner Bits (91841, 10117, 10104, 20563) to drill holes for the hinge cup as illustrated to the left.
Use Concealed Hinge Jig IT for mounting cup holes
Use the Mounting Plate Jig IT for hinge mounting plate holes. Mounting Plate for JIG IT Templates
The Mounting Plate for JIG IT Template accurately positions holes for mounting plates. Also for use with rail system for positioning. Requires self centering bit #68991.
Choose from (5) different templates. Applicable mounting plates are listed with each hinge.
Mounting Plate JIG IT Templates:
1) Jig IT Mounting Plate Template A - 31350 120 Clip Top Hinges 170 Clip Top Hinges (Full of Half Overlay) 90 Mini Clip-On Hinges 95 Thick Door Clip Top Hinges 110 Cross-Corner Clip Top Hinges 95 Blind-Corner Clip TopHinges 60 Bi-Fold Hinges
2) Jig IT Mounting Plate Template B - 31098 170 Clip Top Hinges - Inset only
3) Jig IT Mounting Plate Template C - 31084 165 Zero Clearance Hinges
4) Jig IT Mounting Plate Template D - 31511 120 Clip Top 3-way Face Frame Hinges
5) Jig IT Mounting Plate Template E - 31357 105 2-way Face Frame Hinges Additional Hinge Mounting Products Available
See our Multi-Tool Rail JIG IT for drilling multiple hinge cup holes with a single set up.
Multi Tool Rail JIG IT Our newest system lets you combine two or more original Concealed Hinge JIG IT's together for drilling all the hinge cups on one door with a single set up. It is the right choice for creating consistency from one door to the next. Now available as a value priced Master Pack for drilling two cup holes per door! Additional Concealed hinge JIG IT's can be added for doors requiring three or more hinges. The Master Pack includes a 30'' rail, two alignment plates, one bit guide, and a stop block for positioning the jig on a door. Choose the appropriate drill bit. Mounting plate JIG IT templates are also available for specific hinges, and can be used on the 30'' rail for matching the position of the hinge cups on the door. 35MM Hinge Hole Repair Kit - Kit includes material to repiar two hinge set. Your choice of Cherry, Maple and Oak.

JIG IT template and Rockler/Insty-Bit self-centering bits deliver perfectly spaced and centered shelf pins holes every time. Provides exact set back for shelf pin holes of 37mm (1-7/16'') or 64mm (2-1/2''). Storage areas in handle holds additional drill bits. Clear template features laser cut accuracy. Designed for both face frame and frameless construction. Template system designed to work with 4 bit sizes: 1/4'' and 5mm for shelf pins, 7/32'' and 9/32'' for pin sleeves. 32mm system compatible. 32mm spacing and 37mm or 64mm setback. Quick, easy and accurate shelf pin drilling. Ideal for adding shelves to new or existing cabinets. Drills holes either 1-7/16'' or 2-1/2'' from edge. Insert shelf pin in top or bottom position to extend jig for continuous drilling. ---> Self-Centering Bit Sizes. Rockler JIG IT Shelf Pin Hole Drilling System Bit Size Application 1/4'' 1/4'' Shelf Pin 5mm 5mm Shelf Pin 9/32'' 1/4'' Pin Sleeve 7/32'' 5mm Pin Sleeve All bits fit drilling template. HSS Brad Point drill bit for clean cutting and long life. Exclusive Rockler/Insty-Bit 5mm Self-centering bit. Self-centering bits are pre-set to bore a consistent depth for perfect fitting shlef pins and sleeves every time. No adjustments are neccessary! JIG IT system provides drill bit sizes for both shelf pins and shelf pin sleeves. The decorative metal shelf pin sleeves provide added strength. Self-centering bit designed specifically for Rockler Shelf Pin Drilling Template. Unique design can be used to drill 1/4'', 5mm, 7/32'' of 9/32'' holes with the same jig! ---> Drilling Template works equally well for Face-Frame or Frameless construction on new or existing cabinetry. Frameless Application Face Frame Application with Shelf Pin Quickly and easily adjust handle to either standard drilling setback 1-7/16'' or 2-1/2''. 1/4'' Shelf Pin Supports Brass Antique brass Nickel Black

Hinge Mortising Jig Accurately create a variety of hinge mortises with this easy-to-use jig. Install butt hinges of all sizes with the standard jig. Use special inserts (sold separately) for butler and sewing machine hinges. Or make your own insert for custom jobs. It's simple to operate, and the durable aluminum construction will provide years of reliable help in the shop. The system includes a custom pattern router bit, and complete instructions. No insert is required for routing butt hinges. Use hinge to adjust the jig for mortise length. Clamp in place. Adjust your router depth using the custom pattern router bit. Square the corners of the mortise with a chisel and mount the hinge. Lock Mortising Jig Simply add the specialty inserts (sold separately) to our ''Hinge Mortising Jig'' and create a jig for lock mortises. This system lets you create a perfect mortise for a variety of locks. This system works with both half and full mortise locks. For half mortise locks, use the flush cutting bit (included). Specific inserts are available for specific types of full mortise locks to ensure correct fit. All you have to do is use the right mortise insert and square up the corners! The proper Jig It insert for a given lock is listed above and also with each lock in the online catalog. Using jig and router mortise the lock's surface plate or catch plate Remove body cavity using standard mortising techniques. Square corners and install lock or catch plate. Requires a 7/16'' router guide bushing and 1/4'' straight bit, sold separately.

Designed to work with face frame and frameless cabinets. Simply clamp brackets into place. Mounting brackets make it easy to align full-extension drawer slides to the drawer box once the slides have been mounted into the cabinet. Once full-extension slides are mounted into the cabinet, simply clamp a bracket under each slide, set the drawer box into the drawer opening so it balances on the brackets, and pull the slide to the front of the drawer box. Drive screws and youÆre done!Works with Kreg Universal Drawer Slide Mounting Jig (#38444).Includes left and right brackets.Bracket measures 10" long x 4" high x 1-1/2" wide.Plastic.

Perfect for mounting most types of metal drawer slides, including bottom-mount, full-extension and center-mount.Magnet holds slide during installation.Includes instruction sheet.

An easy-to-use marking and drilling guide for fasteners. Mark location of cam holes with a center punch Includes drill guide bushing for drilling 8mm horizontal hole.
Includes clamp and drill guide.

Our innovative JIG IT system lets you quickly and easily locate, center and a drill cup holes on cabinet doors for fully concealed hinges. For drilling individual holes, our original JIG IT is ideal. The Multi Tool Rail JIG IT is for drilling multiple cup holes on a door with a single set up. It minimizes set up time and eliminates hinge space variations from door to door. Multi Tool Rail JIG IT Our newest system lets you combine two or more original Concealed Hinge JIG It's together for drilling all the hinge cups on one door with a single set up. It is the right choice for creating consistency from one door to the next. Now available as a value priced Master Pack for drilling two cup holes per door! Additional JIG IT templates can be added for doors requiring three or more hinges. The Master Pack includes a 30'' rail, two alignment plates, one bit guide, and a stop block for positioning the jig on a door. Choose the appropriate drill bit. Mounting plate JIG IT templates are also available for specific hinges, and can be used on the 30'' rail for matching the position of the hinge cups on the door.
Mounting Plate for JIG IT Templates Accurately positions holes for mounting plates. Also for use with rail system for positioning. Requires self centering bit #68991. Applicable mounting plates are listed with each hinge. See our original Concealed Hinge JIG IT for drilling individual cup holes. Perfect for smaller jobs where accuracy is needed, but set up is not a concern. Package includes an alignment plate, bit guide, spring, stop collar and clamp. Drill bits and mounting plate JIG IT templates sold separately. 35MM Hinge Hole Repair Kit - Kit includes material to repiar two hinge set. Your choice of Cherry, Maple and Oak.

Simply bring the router bit up through the table and align the jig with the cutting edge of the bit.. This system is ideal for making accurate rail-and-stile construction, lock miter joints and more. All jigs are manufactured for 3/4" stock. They are made of durable HDPE and measure 2" x 37/8" x 3/4". (Jigs designed for rail-and-stile have the rail cut on one side and the stile cut on the opposing side.)

The routing jig makes installation of Soss hinges easy and accurate, eliminating all guesswork. Use with coordinating Soss hinge.

Cuts 3/4'' threads for KD furniture, broom handles, jigs, toys, clamps, and more! The kit contains a threading die for external threads, and a tap for internal threads for through holes.