for small jigs and fixtures. Measures 7/8'' diameter and comes with a 1/4'' -20 threaded steel insert.

The T-slot Jig System operates on T-bolts that slide in the T-slot track or a groove. Save $9.00 over individual purchase of the T-track, knobs and bolts.
4' aluminum T-Track Includes:1 piece of 4 foot aluminum T-trackTwo each of 1'' , 1-1/2'' , 2-1/2'' , & 3-1/2'' x 5/16'' T-boltsFour 5-star knobs; and four T-knobs.

A must for your shop! Kit includes anodized aluminum, 48'' T-track that can be cut to length, plus two hold downs (clamp, 3'' T-bolt, and 5-star knob) good for material up to 2-1/2'' thick. You'll save $9 on the kit over individual purchase of track and hold downs! Extra clamps also available separately. Great accessory for our drill press tables!

2'' T knob gives you that little extra torque when you need it. comes with a through hole.
The 5 star knob with insert and through hole accommodates bolts of various lengths. Works great with our T-slot system.
5 Star Knob with a 1'' Stud. Here's the studded version of our most popular knob.

Get maximum strength when you use this T-Track with our T-bolt system.
Works with router table, drill press tables, band saw tables, and workbenches. Ideal for use with custom jigs and fixtures!
3/4'' Wide x 1/2'' Deep.

Choose from 1/4"-20 or 5/16"-18; for use with any respective 1/4"-20 or 5/16"-18 threaded/hex bolt or T-bolt. Each pack contains two cam levers, two threaded cross dowels and washers.

With its cushioned, textured grip, this extra-long handle is perfect for use with all your shop jigs! At 4-3/8'' long, itÆs especially comfortable for people with larger hands. 5/8'' stud length. 3/8-18. Black only.

HereÆs an inexpensive way to make a dramatic improvement to your drill press table! These lever knobs are designed to let your quickly adjust the angle of your drill press table. ItÆs especially convenient when you need to make that odd angle hole. The 5/8'' large size is for most floor model units with a 5/8'' bolt, including those made by Jet, Delta, and Sears.

Beautifully practical! These ''Euro-styled'' knobs and wingnuts are designed to fit more comfortably in the hands while also being easy on the eyes! TheyÆll enhance the quality and ease-of-use of any jig or piece of equipment.

applies downward pressure on the work piece to give you more control around your bench, router table and table saw. Includes a clamp with a 1 5/8'' long bolt, a 5 star knob, a 1 1/2'' long T-slot bolt and a 4 1/2'' rabbeted guide block with screws.

Build your own jigs with our jig hardware value pack.
Assorted T-bolts, knobs, and inserts for customizing your own jigs and fixtures for your shop.
A $36.00 Value.
The kit contains: 4 each of #23182 5 Star Knob 5/16'' - 18tpi thru 4 each of #23846 5 Star Knob 5/16'' - 18tpi stud 4 each of #71514 2'' T-Knob 5/16'' - 18tpi thru 1 pack of #26026 Tee-Nuts 5/16'' - 18tpi (8 per pack) 1 pack of #28811 5/16'' - 18tpi Threaded Insert (8 per pack) 6 each of #33965 5/16'' x 1'' T-Bolt 6 each of #83311 5/16'' x 1-1/2'' T-bolt 6 each of #33939 5/16'' x 2-1/2'' T-Bolt

for all kinds of jigs and fixtures.

Self Lubricating for friction free sliding wood. UHMW plastic is easy to cut and manipulate for jigs.

Simply untighten knob, tilt down slightly and slide along the threaded rod. Through-hole design accommodates bolts of various lengths. Available in three thread sizes: 1/4-20, 5/16-18 and 3/8-16. Available in three thread sizes! The Quick-Release Advantage: Simply untighten, tilt slightly and slide along the threaded rod.

Ball knob has an easy grip round profile. The 2'' diameter fits securely in your palm. Made from rugged plastic with 5/16'' -18 threaded brass insert.
Ratchet Knob is perfect when access is limited or make star or T-knobs impractical.
Rachet Lever Knob features a push button ratchet clutch. Hold button down and pull up on lever to release clutch. Zinc plated steel bolt is 1'' long.

Set it on the T-slot track for making the same length cuts over and over.
You get a 5 star knob, a 1 1/2'' long T-slot bolt and a 2'' rabbeted stop block. Ideal for use on a drill press table, router table or miter gauge fence.

Customize your own jigs with these T-bolts. The T-head fits inside the T-slot track. Track can be routed with a T-groove bit. Zinc plated steel. All bolts have 5/16'' - 18 thread.

Allow jigs to be moved to any position needed on the track.
Heavy duty carbide cutting bits. First cut a 3/8'' grove with a straight bit or dado blade. Then repeat the cut with our T-slot bit to make a track. 1/4'' shank on the straight bit. 1/2'' shank on the T-Slot bit.