Practically effortless cutting of veneer and other materials.

Soften and round edges or trim veneers using this affordable, unique tool. It comes complete with two blades: A veneer trimmer and an edge softening blade with radii of 1/8'' and 3/16''.

Simply squeeze to cleanly trim both edges flush with plywood faces. 9/16'' to 1-1/4'' range.

Light, durable construction and adjustable, non-skid rubber feet. Electronically controlled heat element is infinitely adjustable. Rear mounted on/off rocker switch and top mounted heat control dial offers variable heat 200 to,100 to allow use of a wider variety of edgebanding materials. Built-in cut-off knife has a palm-strike knob. All fences are guides adjust using the same allen wrench. Laminate covered table is 27'' by 7-1/2'' . Maximum material thickness is 2'' .

Quickly and easily get a high-quality cut on all corners of the board! Simply place the end trimmer on the end of the panel and firmly press the lever down. YouÆll get a high-quality cut on all corners of the board!Plastic body.Comes with two (upper and lower) High Speed Steel blades.End trimmer replacement blades includes upper and lower HSS blades.

Uses single edge replaceable razor blade. Handy compact size.

An adjustable temperature control melts the edge banding adhesive perfectly. Wooden handle protects your hand by remaining cool.

Packs maximum pressure for applying laminates and veneer.

Designed for easy removal of veneer ''ears'', aids in trimming off excess veneer flush with the back side of the face frame, square-cutting rail and stile joints, and more. According to ''Refacing Cabinets'' author Herrick Kimball, ''The Rockler Veneer Trimming Guide is an essential tool for any kitchen refacing project.'' ItÆs designed for easy removal of veneer ''ears'', aids in trimming off excess veneer flush with the back side of the face frame, square-cutting rail and stile joints, and more. Makes perfect butt splices in both vertical and horizontal applications. Slots make edge trimming a snap! Black-plated steel. 1) The Veneer Trimming Guide is designed to easily key into the correct position 2) Simply position the guide and slice along the long edge to trim the on veneered cabinet rails and stiles for perfectly matched butt joints. 3) Trim veneer off flush with the back side of the face frame easier, faster and more accurate with this guide. Position the guide over a stile or rail, insert utility knife in trimming slot, and draw both the guide and knife along the length of the wood. 4) Slots in our trim guide make edge trimming a snap. Refacing Cabinets - Make an old kitchen look new! Step-by-step instructions, 130 photos and 50 illustrations lead to professional results. 160 pages. Softcover - #90595

Jay Roller- Specially designed for laminate, also useful for veneer installations.Gives 20- 25 psi for positive bonding. 3'' wide non-marking rubber roller has no axleprojection on one end for flush work. 14'' length aluminum handle has two soft vinylgrips. Lightweight.
Veneer Roller 1-1/4'' - Very durable tool for applying pressure to veneer. Rollerhandle of selected Northern Hardwood- unfinished. Roller axle is 3/16'' diameter.Roller yoke of 0.062 cadmium plated steel. 1/4'' hole drilled through handle to hangit. 1-3/16'' wide x 1-5/16'' diameter roller. 3-3/4'' log x 13/16'' diameterstraight handle.
Veneer Roller 2'' - Very durable tool for applying pressure to veneer. Roller handleof selected Northern Hardwood, and is contoured for better grip, stained and lacquered. Handle is 4'' long. Roller axle is 13/16'' diameter. Roller yoke of 0.014cadmium plated steel. 2'' wide x 1-5/16'' diameter roller. 1/32'' thick spacerbetween end of roller and yoke.
Veneer Smoothing Blade- 9'' handle of Northern Unfinished Hard Maple. 1/8'' Thick x 5'' Wide white Plexiglas blade. Handle butt beveled for pressing veneer edging.

Applies veneer over both curved and flat surfaces with 1,700 pounds of uniform pressure per square foot. Excellent results with difficult veneers like burls and crotches. Includes a 54'' by 54'' industrial vinyl bag with heat welded seams and a heavy duty diaphragm pump.

Cuts with the grain, across the grain and diagonally to the grain.

Roller measures 1-1/4'' by 1-1/4'' . Handle measures 3-1/2'' long.

Sturdy double edged blade prevents bending.

An economical alternative to a veneer hammer. Beveled Plexiglas blade never scratches.