Use our new 3-piece cabinet scraper set to create a smooth finish on figured wood such as burls, crotches and bird's-eye maple. Set includes high-quality 6" x 2-1/2" Swedish steel scraper for holding an edge longer, 10" mill file and 10" round burnisher. Won't tear out or clog pores, so you'll get a cleaner finish. Creates shavings, not dust!

Rectangular, square, round, oblong, flat and triangular profiles.

Comfortable grip gives you great control and smooth scraping action. Aluminum shaft with extra strong high impact plastic handle is 11-1/2'' long overall. Ideal for paint and varnish. Available in two sizes. 1'' (not shown) and 2-1/2'' wide blades. The 1'' wide does not have the knob at the blade end. 1'' or 2-1/2'' tungsten carbide blade that is double edged. Reverse the blade when dull.
Cutting edges are convex ground to prevent scratching. Edge last 100 time longer than conventional blades. Handle has a hole in the end for hanging. Replacement blades sold individually are available.

Comes complete with a triangle profile blade and belt holster. Additional blades (sold separately) include rounded, pear-shaped, and dropped-shapes. All blades are made of cemented carbide for superior sharpness and durability. Drop-Shaped Blade Pear-Shaped Blade Round Blade

(Upper center in picture.) Set contains a 2-3/4'' by 4-3/4'' gooseneck, 2'' by 5-3/4'' round end and 2-3/8'' by 5-7/8'' straight scraper for concave, convex and flat areas.

Ideal for truing cabinet scrapers prior to burnishing.
Cabinet Scraper Set Set contains a 2-3/4'' x 4-3/4'' gooseneck, 2'' x 5-3/4'' round end and 2-3/8'' x 5-7/8'' straight scraper for concave, convex and flat areas.
Mill File Ideal for truing cabinet scrapers prior to burnishing.
Scraper Great for removing milling marks and final smoothing. Works great on figured woods. Swedish steel edge stays sharper longer. Measures 6 inches x 2-1/2''. Fits the scraper holder 99194.

Leather wallet has three vinyl dividers to accommodate four scrapers.Flap closure with snap.Measures 4-1/4'' x 6-3/4''.

Easily adjust blade depth. Quick change blade replacement.

Lasts longer than conventional blades!Scraper has 2-1/2" wide tungsten carbide blade that is convex ground ù simply reverse when dull.With comfort grip for great control and smooth scraping action.11-1/2" overall length.

Shinto saw rasps are manufactured from high quality saw blades to eliminate clogging.test

Offset handle has comfortable grip and gives you great control.Comes with 2 flat blades.Replacement blades available in round and right angle.

(Upper right in picture.) Ideal for truing cabinet scrapers prior to burnishing. 10'' smooth surface.

Now you can easily execute the small-scale work that's difficult or impossible using full-sized planes. And our 2-7/8'' versions feature the same tough construction. The Scraper Plane is invaluable for the last fine finishing, especially of veneered work. The Block Plane features a fully-adjustable mouth and cutter for trimming. The Bullnose Plane is perfect for fine or coarse work. All are made of rosewood handles and solid brass parts. 1/2'' wide blades.

8" four-in-hand is four tools in one. Each side has both a rasp for solid stock removal and a double cut file for smoothing. One side is flat for working flat or convex surfaces, while the other side is half round for working concave surfaces.6" round bastard file is used primarily for enlarging holes, as well as shaping curved and contoured surfaces. It cuts rapidly yet leaves a relatively smooth finish. File tapers slightly toward the point.6" slim taper is designed for filing all types of saws with 60║ angle teeth, and for filing acute angles. The sides of the file taper slightly toward the point. The edges are cut for filing between saw teeth. Recommended for sharpening 7-point or 8-point handsaws.8" mill bastard file is ideal for sharpening saws, knives, axes, hoes, shovels, scissors and shears. Also used for general purpose fitting.

The handle is ergonomically designed for easy and comfortable handling. Pro Prep allows you to remove multiple layers while reaching into the tightest spaces, resulting in a super-smooth surface. Kit includes one Quick-Change handle plus four interchangeable stainless steel blades.

Planes are engineered to exact tolerances while maintaining traditional standards of workmanship, design and performance.Blades are 95% carbon steel with a hardness of 58-62HRC. (Hardness Rockwell C)Guaranteed sole flatness to within 0.003".Simple and precise adjustment of plane iron alignment, depth of cut and throat opening.Handles on #4 smoothing plane and #5 jack plane are hand-rubbed hardwood.

Turn your planes into functional works of art with these rosewood plane handles. The set consists of handles to fit numbers 4, 5, 6, and 8 planes. Use them to replace broken parts or plastic handles. The smooth rosewood is comfortable in your hand and imparts a sense of the magic of traditional woodworking. Fitting screw is included.

Great for removing milling marks and final smoothing. Works great on figured woods. Swedish steel edge stays sharper longer. Measures 6'' by 2-1/2''.

Use the triangular shavehook for stripping paint and varnish from flat wooden surfaces and edges. Use the heart and combination shavehooks for concave, convex and shaped surfaces such as moldings. Blade should be perpendicular to the surface and drawn toward you.