Comes with three interchangeable blades: 32'' TPI razor blade 24'' TPI razor blade 24'' TPI minature keyhole saber blade
Blades attach with wing net and screw wood handle (4'' long). Razor blades are 4-1/2'' long with rigid metal backbone.

Depth of cut 1-1/2'' 17 TPI

Comes with interchangeable blades for crosscut, ripping and dovetails.

Coping Saw uses standard 6-1/2" long pinned end coping saw blades. Blades are made from the finest hardened and tempered spring or high carbon steel. Precision punched or milled teeth for accurate sawing, smooth finish and longer life.
#99855 Assorted Blades, contains 1 each of 4 blades..125''W x .020''Thick x 20 TPI (Fine Cut)..125''W x .020 Thick x 15 TPI (General Purpose)..125''W x .020 Thick x 10 TPI (Fast Cut)..250''W x .014'' Thick x 32 TPI (Extra Fine).
#99863 General Purpose Blades, 4 per Pack..125''W x .020 Thick x 15 TPI (General Purpose).
#99871 Extra Fine, 4 per Pack.250''W x .014'' Thick x 32 TPI (Extra Fine).

Blade has a 9-1/2'' cutting edge and is 0.5mm thick.

Blade size is 225mm long x 0.3mm thickness with 25 TPI (teeth per inch).Maximum cutting depth is approx. 48mm.Blade has measuring scale on both ends and is adjusted by two wing nut screws.Bamboo-wrapped handle.Overall length 21".Replacement blade sold separately.

Blade has 25 TPI, a 9-1/2'' cutting edge and is 0.3mm thick.

Combination dovetail/flush-cut saw features two interchangeable blades and 7-3/4" L bamboo handle. Dozuki dovetail blade measures 190mm L and has 24 tpi.Flush-cut blade measures 150mm L and has flat set teeth. Blades have impulse-hardened teeth.

Blade has 16.9 TPI, a 9-1/2'' cutting edge and is 0.3 mm thick.

Designed by Toshio Odate for fine joinery. Short stiff blade is 7'' long and 0.3mm thick with raker teeth for fast chip removal. Cuts a maximum depth of 1-3/4'' .

Fine finish pull saw has a fine tooth design that cuts easily with more control and an accurate, fine kerf.With thin, flexible blade that provides extra smooth finish.Comfortable Western handle.Double edge pull saw has teeth on each side of the blade for flexibility.

Protect your Japanese saws with this brown leather saw cover.Features double flap to cover blades.Three vinyl dividers to hold four saws.With double strap to secure it closed.Measures 13-1/2'' x 5''.

Shinto saw rasps are manufactured from high quality saw blades to eliminate clogging.test test

Cross-cut rip blade measures 190mm L and 0.5mm thick with 18 teeth per inch. Dozuki Fine saw blade measures 190mm L and 0.3mm thick with 14 teeth per inch. Both blades feature impulse-hardened teeth to stay sharp. Handle is made with bamboo-wrapped hardwood. 16" overall length.

Overall length is 16'' . Fixed 12 TPI blade has an 8'' cutting edge.

This small Japanese hand saw is used for scoring and cutting panels or veneer. The '' Woodpecker'' hook tooth at the tip '' V'' end of the blade is used to scratch line to start the first cut. Metal backbone (Dozuki) helps keep the blade stiff. Replacement blade (item #65581) 7-1/2'' long cane wrapped wood handle. 14-5/8'' overall length. 6'' cutting edge has hard impulse hardened teeth. 0.3mm (.012'' ) thick blade. 18 TPI with teeth pitch of 1.4mm (0.058'' ).

Reversible handle for flush cutting on either the left or right. 1-1/4'' depth of cut. 9-7/8'' blade length. 14 TPI.

10-3/4'' long, 0.8mm thick blade.

Blade has a 9-1/2'' cutting edge and is 0.5mm thick.

The blades are made of high-quality tempered steel. The ripping side features an 8'' , 8 tpi edge. The crosscut edge is 9'' , 16 tpi. Replacement blades are sold separately.