These supergrips are designed to ensure that the jaws always remain in the desired position while keeping an even preset clamping pressure, regardless of the distance between the jaws! Features include:
nickel plated surfaces durable fully adjustable jaws screws with locknuts for adjusting jaw angle and clamping pressure includes pads

Irwin C-clamps feature double-rolled thread for faster clamping and increased durability.Large swivel pad reduces marring on work surface and increases stability.With large handle for greater clamping pressure with less effort and reduced hand fatigue.Available in 3", 4" and 6" sizes.

Jaw grips adjust for 3/4'' to 13/16'' thick material. Maintenance requires occasional application for grease on screw threads. Stationary pad 2'' x 1-3/4'' gripping jaw measures 1-1/2'' x 1-1/2'' . Made of extruded and injected molded aluminum alloys for strength with light weight screw has 1/2'' Acme thread. Aluminum will not react with wood glue avoiding stains on your wood. Patented jaw grips the work to close the joint, preventing any buckling. A sharp tap on the jaw instantly releases the clamp.
Made in the USA.

Choose from hold-down or push clamp. Both clamps include T-fittings. Also select from hand switch kit or foot switch kit. Both kits include all the necessary hose and fittings for quick, easy start-up.

This unique tool combines the multiple steps of face frame cabinet installation in ONE easy process! '' All-in-one'' design tightens, aligns, allows pre-drilling and fastening of face frame cabinetry. Die-cast aluminum '' claws'' and alignment plate furnished with protective rubber pads - no marring Removal or repositioning of clamp not needed while in use. Furnished with 1/8'' drill bit for pre-drilling of fastener pilot hole. Will install two stiles from 1-1/2'' to 2'' width and up to 1-1/2'' thickness (each) Professional quality installation at a fraction of the time using more conventional clamps.
Sold individually.

Toggle clamps give you an extra hand in the shop, plus allow maximum clearance loading and unloading work piece! All die-stamped steel parts are deburred, cleaned, and receive a zinc-plated finish that resists corrosion. With oil- and stain-resistant hand grips for safety and comfort. Heavy-duty rivets are used to maintain accuracy and increase endurance. With hardened ground pins and bushings. Vertical Mount Post Handle Clamp - 63469 With push-up action. Up to 350 lbs. of holding power. Arm length 1-1/4.
Small Push-Down Lever Clamp - 63437 With new higher base! Up to 150 lbs. of holding power. Base dimension 1-3/8 x 1-1/2. Base height 1-3/4. Arm length 2-1/4. Medium Push-Down Lever Clamp - 63445 Features new higher base! Up to 500 lbs. of holding power. Base dimension 1-3/8 x 1-1/2. Base height 2. Arm length 3. Large Post Handle Push-Up Clamp - 63454 New higher base! Up to 375 lbs. of holding power. Base dimension 1-3/8 x 1-3/4. Base height 2-1/2. Vertical Mount Base Clamp - 63462 With push-down lever action. Up to 150 lbs. of holding power. Arm length 2-3/4.

Stacking clamp system is as easy as 1-2-3. Just clamp panels, stack 'em high and let 'em dry! Includes six clamps, alignment bars and stabilizer bars. Simply set glued boards in and tighten. Easily remove any boards off the rack. Maximum width is 25'' and the length is determined by your workpiece.

20752 - Heavy Duty T-Handle Clamp Bottom of rubber foot adjusts from 1/4 above mounting surface to 3/8 below mounting surface total length with arm extended and T-handle up is 2-5/8 L, Height 2-1/4. Mounting plate is 1-9/16 W x 1 L. Hold capacity approx 200 pounds. 20759 - T-Handle Clamp Bottom of rubber clamp foot adjusts from 3/16 below mounting surface to 7/8 below mounting surface. Total length with arm extended and T-handle up is 3-3/4 L Height is 2-1/4. Length of arm only, extended is 2. Mounting plate is 2-7/8 W x 2-3/4 L. Hold capacity 200 pounds. 20745 - Post Hold Down Clamp Bottom of rubber clamp foot adjusts from 3/8 above mounting surface to 5/8 below mounting surface. Total length with arm in up position is 4-5/8 and height with arm up is 7-7/8. Length of arm only, extended is 2-7/8 Mounting Plate is 1-13/16 W x 1-3/8 L. Up to 375 pounds hold capacity. 20731 - Push Down Lever Clamp Bottom of rubber clamp foot adjusts from 3/8 above mounting surface to 5/8 below mounting surface. Total length with arm extended and lever down 5-5/8. Length of arm only, extended is 2-1/4. Mounting plate is 1-3/8 w x 1-1/2 L. Up to 150 pounds of holding power. The quick release feature applies and releases pressure in a second. Toggle clamps are ideal for routing, drilling and sawing jigs. 20787 - Small Toggle Clamp Bottom of rubber clamp foot adjusts from level with mounting service to 7/16 below mounting surface. Total length with arm extended 2-5/16''. Length of arm only, extended is 1-1/4''. Mounting plate is 1 W x 1-1/16 L. 32103 - Large Push Action Clamp 5/16-18 threading Plunger travels 1-1/8. Mounting plate is 2 W x 3-1/4 L. Hold capacity 450 pounds. Mounting screws are not included.
20738 - Heavy Duty Lever Clamp Bottom of rubber clamp foot adjusts from 5/8 above mounting surface to 3/8 below mounting surface. Total length with arm extended and lever down 7-7/8 Length of arm only, extended is 2-7/8 Mounting plate is 1-3/8 W x 1-1/2 L. Up to 500 pounds holding power. 20766 - Small Push Clamp Plunger travels 5/8. Hold capacity 100 pounds. Mounting plate is 1-1/16 W x 1-3/8 L. Does include wood screws for mounting - brass colored.

Vacuum bag with attached one-way valve connects to hand vacuum pump. Requires no electrical power. Purchase additional vacuum bags for multiple setups at the same time. Hand pump easily connects to the valve on the vacuum bag to remove air from the chamber. Heavy-gauge vinyl vacuum bag measures 47" long x 14" wide.It takes less than a minute to pull all the air out of the bag and holds a vacuum up to 25hg (15 psi).One-way valve allows you to move the bag out of the way while waiting for glue to cure.Comes with breather netting to allow air to evenly evacuate the bag, extra sealant tape and instructions.Additional vacuum bag (to have several pieces under vacuum at the same time) and seal tape sold separately.Vacuum bag, valve and hand pump included.