With cast aluminum case and powder coat finish.Measures 3-3/8'' wide x 4-3/4'' high.Comes with 18 watt bulb.Requires 12 volt transformer and wire (sold separately).

These maintenance free balusters create an impressive and rich appearance!
Arc balusters come in 32 length (for a 36 railing) and are 1'' wide x 1/4'' thick. Sold in packs of five.
Baked-on enamel colors will not chip or peel! Available in Black or Bronze.
See our Deck Enhancement Design Gallery
Arc Baluster Installation Easy to assemble! Attach 2x4 rails to post and then screw balusters on to the rails with included matching screws. Just like installing 2x2s! Railing Connector: (2-Pack) Pre-drilled railing connectors (sold separately) make attaching the railings to posts quick and easy. This highly durable plastic is pre-drilled to ensure accurate attachement of the railing to the post. Includes screws. Can be used on wood and composite railings. Also check out these other balusters and centerpieces Colonial Baluster Baroque Baluster Classic Baluster Centerpieces

36421 - Elk Panel Measures 24H x 48L 30987 - Fighting Elk Panel Measures 24H x 48L
Each panel is made from a single sheet of 3/16 thick plate steel.
Installation is easy. Simply groove the logs with a 1 x 1/4 groove, set the bottom and side logs, insert the panel and position the top log. If you are using clean lumber or milled, or evenly rounded logs, the groove can be reduced to 3/8 x 1/4.
The Balcony Panels may be trimmed.
Trees Panel measures 24 high x 60 long.
Elk Panel and Fighting Elk Panel each measure 24 high x 48 long. 36618 - Trees Panel Measures 24H x 60L

These maintenance free balusters create an impressive and rich appearance!
Baroque balusters come in 32 length (for a 36 railing) and are 1'' wide x 1/4'' thick. Sold in packs of five.
Baked-on enamel colors will not chip or peel! Available in Black or Bronze. See our Deck Enhancement Design Gallery Baroque Baluster Installation Easy to assemble! Attach 2x4 rails to post and then screw balusters on to the rails with included matching screws. Just like installing 2x2s! Railing Connector: (2-Pack) Pre-drilled railing connectors (sold separately) make attaching the railings to posts quick and easy. This highly durable plastic is pre-drilled to ensure accurate attachement of the railing to the post. Includes screws. Can be used on wood and composite railings. Also check out these other balusters and centerpieces Colonial Baluster Arc Baluster Classic Baluster Centerpieces

Adding a bench is as easy as mounting a bracket! These brackets mount directly to your deck. You need only add your own lumber. Brackets are made of 3/16'' thick steel and are 2'' wide for extreme strength and durability.
Mount 24'' to 36'' apart. Bench height is 15 - 3/4'', exclusive of bench material. Angled for comfort. Reinforcement brace included.

Create a more refined look by adding this hardy, attractive cedar molding to the base of deck posts. Sold in 1/2'' x 1'' x 4 foot lengths. A standard 4 x 4 post will take approximately 20 '' of molding to go all the way around. Great for railings and planters, too!

Get the charm of wrought iron at a fraction of the cost. Both the extruded balusters and the cast centerpieces are made of lightweight, durable, easy-to-care-for aluminum. And the baked-on enamel colors will not chip or peel! Balusters come in 26'' (for a 36'' railing) and 32'' (for a 42'' railing) and are both 3/4'' in diameter.

Centerpieces are available in the popular Classical, Nouveau, Vineyard or Fleur De Lis styles (see below).
Attach centerpieces to balusters using self-tapping metal screws (included). Baked-on enamel colors will not chip or peel! Available in Black, White, Clay, Bronze or Green.
Installation Kit sold separately. Includes 4-1/2 marking template, 3/4 spade bit and an informational video that discusses standard rails, stairs and how to cut deck posts. See our Deck Enhancement Design Gallery Centerpiece Styles Classical Vineyard Nouveau Fleur De Lis
Please specify your choice of black, white, clay, bronze or green when placing your order. Also check out these other balusters Colonial Baluster Baroque Baluster Classic Baluster Arc Baluster

Classic balusters come in 26" length (for a 36" railing) and 32" length (for a 42" railing) and are 3/4" in diameter. Sold in packages of ten.





These maintenance free balusters create an impressive and rich appearance of wrought iron.


Baked-on enamel colors will not chip or peel! Available in Black, White, Clay, Bronze or Green.
Optional centerpiece designs add flexibilty to the deck rail design. Available in four styles. See our Deck Enhancement Design Gallery Classic Baluster Installation Measure railing opening and cut 2x4 rails to length. Screw on baluster connectors. Insert balusters and put on top of 2x4 rail and cap rail.
Baluster Connectors: (20-Pack) Baluster connectors (sold separately) allow Classic Colonial Balusters to be secured to the rail without drilling. This molded plastic connector simply screws down on to the rail with the provided screws. Can be used on wood and composite railings. Railing Connector: (2-Pack) Pre-drilled railing connectors (sold separately) make attaching the railings to posts quick and easy. This highly durable plastic is pre-drilled to ensure accurate attachement of the railing to the post. Includes screws. Can be used on wood and composite railings. Also check out these other balusters and centerpieces Colonial Baluster Arc Baluster Baroque Baluster Centerpieces

See our Deck Enhancement Design Gallery With economical and safe low voltage wiring.Fast and easy installation.Available in two sizes: 3-1/2" x 3-1/2" will fit any standard 4" x 4" wood post and any true 3-1/2" x 3-1/2" vinyl post. 4" x 4" will fit any standard true 4" vinyl post.Choose from White or Tan.Classy Caps kit includes six Classy Caps, 60 watt programmable photocell transformer, 75-foot 14-gauge cable, six 4-watt bulbs, six quick-connect low voltage light sockets and cams, 12 stainless steel mounting screws and cable extension connector. Kit expandable up to 15 Classy Caps using 4 watt bulbs.

These maintenance free balusters create an impressive and rich appearance of wrought iron.
Colonial balusters come in 26 length (for a 36 railing) and are 3/4 in diameter. Sold in packages of ten.
Baked-on enamel colors will not chip or peel! Available in Black, White, or Bronze. See our Deck Enhancement Design Gallery Colonial Baluster Installation Measure railing opening and cut 2x4 rails to length. Screw on baluster connectors. Insert balusters and put on top of 2x4 rail and cap rail.
Baluster Connectors: (20-Pack) Baluster connectors (sold separately) allow Classic Colonial Balusters to be secured to the rail without drilling. This molded plastic connector simply screws down on to the rail with the provided screws. Can be used on wood and composite railings. Railing Connector: (2-Pack) Pre-drilled railing connectors (sold separately) make attaching the railings to posts quick and easy. This highly durable plastic is pre-drilled to ensure accurate attachement of the railing to the post. Includes screws. Can be used on wood and composite railings. Also check out these other balusters and centerpieces Classic Baluster Arc Baluster Baroque Baluster Centerpieces

Make a short bench on one side of your deck or use as a railing with integrated seating around the entire perimeter ù just add 2x4Æs and 2x6Æs.Simple assembly using basic tools.Bracket measures 23" high x 19" wide x 3" thick.Two brackets per kit.Space bench brackets no more than 24" apart and 12" from the ends of the bench.Includes ACQ treated lumber-resistant mounting hardware and instructions.Bracket made of durable, maintenance-free resin.10-year warranty.Sand color. Brackets are made of durable, maintenance-free resin. Space bench brackets no more than 24'' apart and 12'' from the ends of the bench. Use for new installations or retrofit onto existing decks or docks.

Add an accent on plantings, light the garden path or put a little shine on your deck with these lights and light kits! #30808, the rectangular light kit, comes with 4 lights, an 88 watt transformer (up to 12 lights total per transformer), 50' of wire and wire nuts. All components are UL listed. The rectangular mini louvered light (#30828) is a small, decorative light for deck posts and balusters. Fixtures are cast aluminum with a textured architectural bronze finish.

Photocell 12 Volt Transformer & WireThis 12V digital transformer with built-in photocell lets you automatically turn the lighting on at dusk and off at dawn. Additional settings allow lights to automatically turn on at dusk and then off in 4, 6 or 8 hours increments.
Exterior-Rated 12 Volt Transformers12V transformer with multiple on/off timer - lights can be set to go on/off up to two times each day!
Both transformers are exterior rated and not for use with submersible or pool/spa equipment.

These low voltage lights are designed for wet area use, they are available in your choice of ''accent'' or cleated design. The cleat version safely moors boats up to 28 feet in length. Both designs feature a 7-watt, 12-volt, 20,000-hour Xenon lamp with high impact glass-filled white nylon shrouds. They also include silicone sealed connections and stainless steel mounting hardware. Recommended spacing for each fixture is 8-16 feet apart. Replacement bulbs rated to 20,000 hours are also available. This low voltage system requires a transformer and low voltage cable.
We offer two wet area rated transformers, ideal for use around decks, docks, pools or recreational use wet areas. Both transformers measure 8.4'' X 4.22'' X 5.5'', have a stainless steel case and come with a 4 foot cord. Transformers require a separate timer. Timers can be set dusk to dawn or in 2-hour increments through 12 hours. Our 10 gauge 2-wire cable comes 100 feet long.
Transformers, timers, cables and replacement bulbs sold separately. See order form above.

White Flat Deck Light Brown Flat Deck Light Green Flat Deck Light Black Flat Deck Lights
Features include safe, low-voltage wiring for lights plus a low-maintenance, powder-coated finish over sturdy cast aluminum. For average-size decks, a light (18 watt bulb) on each corner with post caps in between is standard.
Requires transformer, pigtail connector, and wire sold separately.
Click to see our matching Flat Post Caps

Black Flat Top Deck Post Cap
White Flat Top Deck Post Cap Green Flat Top Deck Post Cap Natural Brown Flat Top Deck Post Cap Click to see our matching Lighted Post Cap
Fits 4'' x 4'' (nominal) wood posts.

From dark to dazzling with these incredible lights.
These versatile, flush-mounted lights come in kits of 10 or individually. Used with standard 12 volt transformer. These lights can be walked on and even driven over. Each puck-sized, 3'' diameter, light (4 watt bulb) is designed to be flush mounted in a flat bottom hole with 7/8'' center through hole for wiring base. Use our #44891 3-1/8'' Saw Tooth Bit and #36827 7/8'' spade bit to install this light in a matter of minutes.
Comes with white frosted lens.
Requires transformer and wire (sold separately). Photocell 12 Volt Transformers Wire The 12V digital transformer is exterior rated. Not for use with submersible or pool/spa equipment.
12V digital transformer with built-in photocell lets you automatically turn the lighting on at dusk and off at dawn. Additional settings allow lights to automatically turn on and then off in 4, 6 or 8 hours.
Exterior-Rated 12 Volt Transformers12V transformer with multiple on/off timer - lights can be set to go on/off up to two times each day! Not for use with submersible or pool/spa equipment.

White Pyramid Deck Postcap Black Pyramid Deck Postcap Brown Pyramid Deck Postcap Green Pyramid Deck Postcap
Click to see our matching Lighted Pyramid Post Caps

Paver Lights
Each kit includes 8 fixtures (base and lens), 4 watt lamps, socket/ connectors, one 12V, 88 watt single set transformer with one on/off setting, and 50 feet of cable.
Both systems feature safe, economical 12V operation. Paver lights are 4'' X 8'' and work in new or existing interlocking paver structures. Deck/Dock Lights
Each kit includes 8 fixtures (base and lens), 4 watt lamps, socket/ connectors, one 12V, 88 watt single set transformer with one on/off setting, and 50 feet of cable.
Deck/Dock lights are 3'' X 4'' and install easily in wood decking.

Choose a style that will complement your decor in either rot-resistant cedar or powder-coated copper. Ideal for decks or porches.

Green Pyramid Deck Lights
Brown Pyramid Deck Lights White Pyramid Deck Lights Features include safe, low-voltage wiring for lights plus a low-maintenance, powder-coated finish over sturdy cast aluminum. For average-size decks, a light (18 watt bulb) on each corner with post caps in between is standard. Fits 4'' x 4'' (nominal) wood posts.
Requires transformer, pigtail connector, and wire (sold separately). Black Pyramid Deck Lights
Click to see our matching Pyramid Post Cap

Solar-powered vinyl post caps provide an economical, safe lighting solution for decks and exterior stairways.Provides up to 10 hours of light per night.Easy to install.Ultra-bright LED.UV stable, 100% prime PVC.WonÆt fade or chip.Includes 4 watt bulb, long-life rechargeable battery and stainless steel mounting screws.No wiring required.UL listed.2-year warranty.