Just press-fit these solid brass bezel fittings into any surface with a 2-3/8 inch hole. A bright polished finish surrounds a real mineral glass lens. Includes German quartz movement with battery cover. Superior metal spring clip installation. Operates on N cell battery. Battery not included.

Create stunning clocks like the one using this back mount design fit up. Features include a real glass lens and a back cover, quartz movement, plus your choice of white easy to read or ivory face with roman numerals. Mounts into a 3-1/8'' diameter hole and held in place by a smaller 2 - 7/8'' diameter exterior viewing hole 13/16'' thick.
Requires one AA battery (not included).

Every type of clock hand is offered from the simple to ornate.
Set Minute Hand Length A 2'' B 2-5/8'' C 3-1/8'' D 3-7/16''

These knobs with backplates and matching escutcheons are made of solid brass! Mini set (#70252) is 1-5/8'' long by 1/2'' high with a 3/8'' diameter knob and 5/16'' projection. Polished brass finish.
See also Mini Chippendale Pulls

All markers have a brass colored finish, which can be spray painted any color you choose.

An attractive '' change of face'' from traditional round clocks. Choose from white Arabic of ivory Roman dials, both 3-1/4'' Long x 2-3/8'' Wide. Ribbed rubber gasket allows for easy installation into a 2-3/8'' hole.

Clock faces have quartz movements. Easy to install. Just cut a hole and pop the fully assembled clock into place. Battery operated (not included). Use a 3'' hole saw or large saw tooth bit for these 3-1/2'' outside diameter clocks.

Easy to install. Just cut a hole and pop the fully assembled clock into place. Battery operated (not included). Use a 3'' hole saw or large saw tooth bit for these 3-1/2'' outside diameter clocks.

Your best choice when making a gift meant to become an heirloom. These fittings contain the finest materials, such as a solid brass case, a replaceable battery and a mineral glass lens. 2'' outside diameter clock fittings mount into a 1-3/8'' hole.

Your best choice when making a gift meant to become an heirloom. These fittings contain the finest materials, such as a solid brass case, a replaceable battery and a mineral glass lens. 2'' outside diameter clock fittings mount into a 1-3/8'' hole.

Arts Crafts Style Grandfather clock Plan A combination of features- the protruding faux through tenons, the impressive 7 foot height- makes this majestic clock a classic. Thanks to the easy-to follow plan, the project is possible for the average woodworker. The plan includes instructions for making the faux through tenons. Measures 7 feet high X 27 1/4'' wide X 16'' deep.
Clock Movement and Face
Westminster movement chimes at each quarter hour and strikes at the full hour. Wooden pendulum features 4 1/2'' brushed brass bob. Includes mounting brackets, weights, hands and chains.
Clock FaceSilk screen on birch plywood clock face is designed by our artists. Clock face measures 17 3/4'' X 17 3/4'' .Features:4/4 Westminster chime on each quarter hour and strikes on the full hour. A silencing position is available.Automatic Beat to simplify the rhythmic beat-setting of the clock.Straight wood pendulum (with polished brass bob).Pre-installed chains.Specifications:Hermle 8 day, Westminster chime, chain driven movement.Solid brass plates- size: 4 3/4'' Wide X 4 3/4'' High X 1/8'' Thick.Pendulum length: 34-7/8" from center of hand shaft to tip of pendulum.Pendulum swing: 10-1/2".Pendulum bob: 4-1/2" diameter.Movement comes complete with chime rods and block, straight wood pendulum, brushed brass weights.

Super slim line movement doesn't take much space at only 2-3/16'' Wide x 2-3/16'' High x 9/16'' D. The on/off switch is easily accessible. Runs up to a year on a single AA alkaline battery and offers precise time keeping.
Choose from a variety of Clock Hands (sold separately).

2-3/4'' outside diameter clock fittings mount into a 2-3/8'' hole.
Clocks have a small tab for a friction fit mounting.
Each movement includes a second hand.
Operates on '' AAA'' cell battery (NOT INCLUDED)

This quartz clock movement and pendulum set operates on one AA battery (not included). Can be used on any clock blank with a face up to 3/8'' thick.
Hands Sold Separately

It even changes the clock for Daylight savings time. The signals provide the clock with the national time standard. The hands shown in the photo are included. Due to radio signal, do not use with metal dials or numbers. Radio signal covers the continental U.S.

Clock faces that will look great on your clocks! Faces measure 8-1/2'' x 8-1/2'' . Plastic.

Clock escutcheon pull comes in one hard to find size for clock drawers. The antique solid cast brass small set is 2'' by 1-1/2'' with a 1-1/2'' bore.

Quartz movements are in these clock fittings. Batteries are included. Uses a replaceable watch battery. 1-7/16'' outside diameter clock fittings mount into a 1-3/8'' hole. 7/16'' thick overall, requires a minimum depth of 1/4'' for mortise. Three serrated tabs will hold clock into hole. Has hour and minute hand only. Clear cover protects face. Black Roman numerals with white face.

Quartz movements are in these clock fittings. Batteries are included. Uses a replaceable watch battery. 1-7/16'' outside diameter clock fittings mount into a 1-3/8'' hole. 7/16'' thick overall, requires a minimum depth of 1/4'' for mortise. Three serrated tabs will hold clock into hole. Has hour and minute hand only. Clear cover protects face. Black script Arabic numerals with brushed gold face.

Quartz movements are included with these clock fittings. Batteries are included. 1-7/16'' outside diameter clock fittings mount into a 1-3/8'' hole.
See creative clock plan for inspiring ideas.
Comes with a battery.

Quartz movements are included with these clock fittings. Batteries are included. 1-7/16'' outside diameter clock fittings mount into a 1-3/8'' hole.
See creative clock plan for inspiring ideas.
Comes with a battery.

Build your own weather station with these reliable and functional gauges for measuring humidity, atmospheric pressure and temperature. All instruments are 2-7/8'' (front diameter), 2-3/8'' (rear mounting diameter) and 3/4'' deep. Hole saw and arbor also listed.