Made for 3/4'' stock. Two cams are provided--one straight for lipped applications and one formed for flush or overlay applications. Used with 3/4'' stock.
Plated finishes.

Can be used for lipped or flush/overlay applications.Two cams are provided-- one straight for lipped applications and one formed for flush or overlay applications. Used with 1-1/2'' stock.
Plated finishes.

Cam Lock perfect for narrow vertical rails. The fixed mounting plated won't rotate or shift. Mounts for either right or left applications. Perfect for narrow vertical rails. Offers three setbacks (1/32'' , 9/32'' and 15/32''). Keyed alike.

Central locking system locks up to six drawers in both pedestals plus the pencil drawer with one key. Completely adjustable pin system allows placement of drawer locking pins in any position. Polished brass. Requires a 3/4'' diameter hole.

Lock up your valuables and keep them safe with this four-digit combination locking bolt. Re-codable in seconds.Includes security mounting screws that cannot be removed once inserted.Easy installation.Rust-proof for interior or exterior use.Measures 4" x 2" x 1".

Mechanism housed in a plastic casing. Antique bronze finished steel bolt. Cylinder requires a 7/8'' diameter hole. Use on 3/4'' material. Two keys provided. Keyed alike.

You can lock two cabinet doors with one turn of the key--a great convenience. Requires a 3/4'' boring for the lock hole. Use on 3/4'' material.

Features electro-mechanical pin bolt lock, suitable for controlling access to doors and drawers in furniture and cabinets. Link up to six locks to one 12V DC power supply unit using a combination of a 6-way distribution block and extension cables (available in 39" L and 78" L). Keyed lock switch available in Brass and Black. Comes with 39" cable. Power switch comes with 39" cable. Power outage will activate locks.
Lets you control one lock or multiple locks with just one switch (either a simple toggle or keyed lock).

Sturdy lock for 3/4'' offset applications. This lock is available for either vertical or horizontal applications.

This versatile lock can be used on everything from roll top desks to overhead bins. Door lock requires a 3/4'' diameter boring. Use on 3/4'' stock. Keyed alike.

Use this lock for right hand applications. Stamped steel lock body--Escutcheon not provided. Key is brass plated. Requires 1-3/8'' L x 1-1/8'' D x 3/8'' mortise. Brass selvedge is 1/2'' x 2-3/4'' . Keyed alike.
Jig It insert available for creating the mortise with our Jig It Mortising System.

Brass plated lock requires 2'' L x 1-1/2'' D x 5/16'' mortise. Selvedge is 3/8'' x 3-1/8'' . Escutcheon provided.
Jig It insert available for creating the mortise with our Jig It Mortising System.

Lock is perfect for right hand glass door. A small sized lock that's perfect for right hand glass doors with narrow frames and drawers. Brass selvedge is 1/2'' x 3'' and covers the steel lock body. Requires a 1-3/4'' x 3/4'' x 3/8'' mortise. Brass plated key. No escutcheon provided. Two keys provided. Keyed alike.
Jig It insert available for creating the mortise with our Jig It Mortising System.

Great for lift lids on small chests and roll top desks as well. A two-way winged bolt expands to catch the strike plate. Requires a 1-3/4'' L x 1'' D x 5/16'' mortise. Solid brass selvedge is 1/2'' x 3'' and covers the steel lock body. No escutcheon provided. Brass plated key.
Jig It insert available for creating the mortise with our Jig It Mortising System.

Five piece set with a dull brass finish and traditional brass escutcheon plate. Requires 1-3/4'' L x 1-1/2'' D x 3/8'' thick mortise. Brass selvedge is 5/8'' x 3-1/8'' and covers steel lock body. Two keys provided. Keyed alike.
Our JIG IT Mortising System lets you create a perfect mortise for a variety of locks. This system works with both half- and full-mortise locks. Special inserts are available for specific types of full-mortise lock catchplates to ensure correct fit. All you have to do is use the right mortise insert (#30979) and square up the corners!

Pin and hook bolt provide extra security. Brass selvedge with a nickel plated strike plate. Requires a 2-1/4'' L x 1-5/8'' D x 1/2'' mortise. Brass selvedge is 9/16'' x 2-9/16'' and covers the steel lock body. Keyed different.

Get secure locking capabilities and help prevent door warping with this three-point door locking system. The Gang Lock is easy to install and features a center catch and bars that rotate to catch locking pins on the top and bottom of the cabinet. Overall assembled length is 80-5/8'' (interior cabinet maximum length). Rods can be easily cut for shorter applications. Nickel-plated.

The gang lock allows just one turn of the key lock to unlock three drawers at once. Adjustable system permits locating drawer locking pins in any position. Polished brass lock comes with two brass keys. Keyed alike. Requires a 3/4'' diameter hole.

Single glass door deadbolt lock mounts either vertical or horizontal.Double glass door deadbolt lock has tab that provides lock for opposing door.Locks must be recessed 1/2" to 3/4".Strike plate, screws and two keys included.Nickel finish.

Mounts from the backside for low profile appeal. Features a brass backplate. Suitable for right hand door applications. Requires a 1-3/4'' L x 3/4'' D x 3/8'' thick mortise.
No escutcheon provided.

Mounts from backside for low profile appeal. Made from brass plated steel, it is suitable for use on doors. No escutcheon provided. Requires a 2-1/8'' L x 1-1/8'' D x 3/8'' mortise. No strike plate is necessary. Two keys provided. Keyed alike.

This strong, brass lock will keep your chest securely locked. Two hooks ensure extra protection against opening. Zinc plated key. Requires a 1-3/8'' L x 1-1/8'' D x 5/16'' mortise. Two keys provided. Keyed alike.

Brass lock mounts form the backside for low profile appeal. Suitable for right hand door applications. No escutcheon provided. Two zinc plated keys provided. Keyed alike.

Change your combination any time the lock is unlocked and as often as you want. Push the change button in (located on bottom of the lock) with a paper clip while setting a new combination. With the combo set at 0 0 0 turn the threaded cylinder while keeping the front housing and cam stationary. Set the combination to the number that opens the lock. Release pressure on the change button by removing paper clip. It is that easy!

Easy to install - simply attach bracket using the screws supplied. Close door(s) and push on the Pop It knob. To open door(s), insert key and rotate 90 Pull the Pop It knob away from the bracket. Mounting brackets are made of flexible plastic and fit various door and drawer designs.Easy to install.Knob measures 1-1/2" diameter x 1" deep.Available in White or Unfinished Beech.Includes mounting screws.