Accuride's 1 2 3 slides are so easy to install that it actually eliminates measuring! Just 3 easy steps and you're done.
This innovative system accepts European hinges that are adjustable in three directions. One set handles one 30 lb. door.
Use on doors 5/8 to 1-1/4'' thick and up to 24'' wide and 42'' tall. Door and slide requires 2'' of side space plus face frame width. Door travel equals length of slide less 4-1/2''.
We sell the Accuride 1 2 3 slides without hinges to allow you the most flexibility in your use and installation. Accuride refers to this as a 1 2 3 4 system on their Technical Information Sheet.
One hinge set is required per door. Hinge sets come in 3 styles for nearly any application: #90403 Inset/Face frame applications for doors up to 13/16'' thick. (Requires a 35mm bit). #90406 Overlay applications for doors up to 13/16'' to 1-1/4'' thick. (Requires a 40mm bit).Thick Door Inset applications for doors 1'' to 1-1/4'' thick. (requires a 40mm bit).
PLEASE NOTE: We DO NOT carry all sizes listed on the Accuride Product Information Sheet. We sell the Accuride 1 2 3 slides without hinges to allow you the most flexibility in your use and installation. Accuride refers to this as a 1 2 3 4 system on their Technical Information Sheet.
To complete your purchase of this system you will need to purchase a set of slides and a set of hinges for each door you are installing.

The MAC System is an innovative new product that provides easy access to media component wiring. It offers a complete media hardware solution for residential or commercial cabinets designed to hold computer or electronic components. Computer or entertainment center can only be rotated when slides are fully extended to prevent damage to the inside of the cabinet. Detent-in and detent-out holds shelving units securely in place. Cable management system keeps wires clear of the slides; cable clips attach to shelves to keep wires neatly bundled at the back of components. Swivel plate dimensions are 21" wide x 18" deep. 300 lb. load rating. Accommodates shelving units 20-3/4" wide by 18" deep and up to 55" high. Includes cable management system, cable clips, power strip, cable ties and mounting hardware. Compatible with EIA mounting standards. Black. View QuickTime Video Download Winamp Video MAC Overview Video 11,134KB MAC Overview Video 9,892KB
Load Rating: 300 lb./136.4 kg. Applications: Designed to carry shelving units for home theatre, computer, or other electronic components in consumer or commercial applications. Accommodates shelving units 20 3/4" wide by 18" deep and up to 55" tall Full 20ö extension 90░ rotation in both directions provides full access to the back of shelving units Slides are black electroplate and swivel plate is black powdercoat Compatible with EIA mounting standards Special Features Detent-in and detent-out holds shelving units securely in place Rotation function actuates only when slides are fully extended preventing damage to the inside of the cabinet Cable management helps keep wires clear of the slides Cable clips attach to shelves to keep wires neatly bundled at the back of components Power strip and cable ties also included Extra Information The M.A.C. provides for the aesthetic integration of media components into surrounding cabinetry.

Movement of one door causes other door to move at the same time - ideal for contemporary cabinet designs. Single track fitting lets you create a unique design in either vertical or horizontal applications. Choose from three travel lengths for either overlay or inset doors.Each set includes two 98-1/2" runners with pre-mounted counterbalanced slide mechanisms and hardware.Runners may be cut to required length.Satin aluminum.Compatible with wood framed doors.Maximum door panel weight 33 lbs.Priced per set.Doors not included.

Minimum cabinet top thickness is 1 inch. Side View Door Bottom No guide rail in the cabinet bottom panel makes it quick and easy to mount cabinet doors. Running gear clips directly into 35mm drill hole (shown at right) for quick and easy installation. These sliding door hardware fittings give sliding doors silent operation and concealed appearance. Quick cabinet door mounting! #39704 Sliding wood door hardware set consists of four running gears with clips, two guides and two stoppers. Top Rail Set (37461) sold separately. Sliding gear is non-removable once attached to the door. Designed for 5/8" and 3/4" door thicknesses. Minimum cabinet top thickness 1". To mount, use top rail set (sold separately) that includes two 49" rails (with one notch per rail) that can be cut to size. Maximum door weight 22 lbs. Maximum door width 49". To install rollers, use 35mm carbide bit (#46532 sold separately).Recommended for use with softwood or MDF construction.

A set is enough for one sliding door. Groove for track is 9mm Deep x 7mm Wide. The ribbed side of the track will hold it firmly within the groove. Both upper and lower guides require drilling 35mm holes in doors. Tracks are made from brown extruded plastic. Upper and lower guides are made from molded plastic. Upper guide has adjustable lug-lockable at 5mm and 8mm depths. Lower roller guide has vertically adjustable steel spindle with nylon roller for door thickness of 5/8'' or greater. Weight rating of up to 44 pounds per door.

Sliding Door Kit contains: 2 Sliding door tracks 2 Sliding door upper guides 2 Sliding door lower rollers 1 Instructions for sliding door kit

Use for 1/4'' sliding cabinet doors made from plywood, hardwood, glass or pegboard. Track stains easily to match your woodwork. 5' lengths. 1-1/16'' wide. Hard Maple.

Each set handles doors weighing 26-75 lbs, measuring 3/4'' to 1-1/4'' thick, and up to 26'' wide and 78'' tall.á Anti-rack cables keep door square and prevents sagging. Door and slide require 2 to 2-1/2'' side space plus face frame width. Door travel equals length of slide minus 4-1/2''. When ordering, first choose the slide for your cabinet depth.á Then select a carrier strip based on the height of your door.á Hinges are included with carrier strips. One hinge/ carrier set and one slide set is required per door (sold separately.) Black finish NOTE: We MAY NOT carry all sizes listed on the Accuride Product Information Sheet.

Attaches a flap to any flipper door system to hide the slide mechanism when the door is open. The door hides behind a false wall built into the cabinet. The spring mechanism keeps the door firmly closed at 90. It also keeps the column in like with the door. Hinge installation requires a 35 mm hole. Requires the use of an interior wall and a 2'' to 3'' flap. Self-closing, zinc hinge.

Horizontal Vertical Use these medium duty door slides for horizontal or vertical applications. This ball bearing slide allows a door to hide inside the cabinet when open. Perfect for TV armoires and entertainment centers.
Use on 3/4'' thick inset doors mounted either vertically or horizontally. Slide members and ball retainers are made from cold rolled steel with a zinc finish. One set handles a 25 lb. door. Slide and door require 1-3/4'' of side space. Minimum cabinet depth must equal slide length plus 3/4'' door thickness. The door travel will equal length of slide less 4-1/2'' .
To order, just choose the length of slide you need and one hinge set per door. (Note: one hinge set sold separately is required per door). Hinge sets include two 35mm inset hinges for use with these slides. Use a 35mm bit for installation of concealed hinges (also available here).
NOTE: We MAY NOT carry all sizes listed on the Accuride Product Information Sheet.

Put an end to cabinet doors that turn too soon.Rollers also help align inset doors.Easy to install.Screws included.

Slide rollers run across the back of cabinet door never touching door face! Attached brackets provide easy mounting of interior wall to conceal sliding mechanism. Auto-open pushes cabinet door open the last 1-1/2" of travel to ensure door is fully extended. Each set accommodates door up to 42" H and 30 lbs. Minimum stile width of door is 2-1/2". Fits door sizes 3/4'' to 1-1/2'' thick. Vertical doors 42'' high x 24'' wide.Auto-open, anti-sag adjustment feature. Door travel equals slide length minus 4-1/2". Requires 2-1/4" side space. Requires #91841 40mm cup bit to install hinges.

Safeguard cabinet doors from dents and gouges, caused by sharp corners. Made from durable white plastic. Used on 3/4" material. Measures 1-1/16'' long x 23/32'' high x 7/16'' thick.
Sold in package of two.

Maintain alignment and smooth parallel movement without cables or pulleys. The firm click stop lets you know when the door is all the way in or out. Ball bearing slides are precision engineered. Use on 3/4'' thick inset doors. Each set includes hinges, slides and rack and pinion hardware for one door. The rack & pinion rods can be cut to length. 2'' of side space is required.
Choose the standard version for doors up to 44'' in height. Includes two slides, two hinges and a 42'' connecting rod. 30 pound weight capacity.
Choose the long version for doors up to 62'' in height. Includes three slides, three hinges, and a 60'' connecting rod. 45 pound weight capacity.
Both versions come in your choice of 20'' to 26'' slide lengths.

Easy-down soft close feature lets you safely close overhead storage doors up to 48" wide.Includes pair of slides, two cylinder covers and four clip-on brackets with screws.Slides have 30 lb. weight rating.Minimum door thickness 3/4".Requires routing door back and case top.Easy installation. Vertical Over The Top Flipper Door Slide Overlay Cabinet doors conveniently lift up and slide back on top of housing unit.
Flipper Door Slide Dimensions