Increases the abrasive life of sanding belts and discs up to 10 times as long. Fast and easy to use. Cleans while your sander is running. Saves time and money. Improves the finish quality. Prevents burns and marking.
Stick measures approximately 1-1/2'' x 1-1/2'' x 8'' .

Now you can reach into crevices and other hard-to-reach locations. Use for moldings, turnings, carvings and models. Made of blue plastic. Spring loaded top end for easy changing of sanding belts. Spring tension keeps belt firmly on holder. Belt can be rotated to '' Free'' paper when needed. A simple, sleek, sanding tool developed for hobbyists, craftsmen, woodworkers, machinists and anyone who has a need to sand unreachable or finely detailed surfaces.
When you buy the 1/4'' Detail Sander And Belts Set you'll get a 1/4'' by 6'' holder along with 15 sanding belts (5 each in grits of 80, 120 and 240).

Small set includes sizes 5/8'', 1/2'', 3/8'', and 1/4'' for concave/convex curves, one flat grip and one sandng pad. Large set includes three grips in 3/4'', 7/8'' and 1'' sizes for concave/convex curves.

Palm side of DynaMitt accepts hook-face abrasive sheets (sold separately) and standard 5" hook-and-loop sandpaper. Allows you to easily control pressure and sanding coverage.Includes rubber insert for more rigid applications; insert fits into pocket under hook-face area.One size fits all.DynaMitt abrasive sheets pack includes one non-woven nylon sheet and two each: 80 and 180 grit aluminum oxide cloth; 80, 120, 180 and 320 grit aluminum oxide gold sheets.

Made in Belgium exclusively for Liberon.Grade 0000 extra fine steel wool has the longest continuous running fibers and is practically oil-free. Crumble resistant. Ideal for applying paste wax and cutting back coats of lacquer, french polishes and shellacs.Grade 00 and 0 steel wool used for slightly heavier work, such as cleaning surfaces thoroughly between stripping and resurfacing.Excellent liquid retention for evenly spreading strippers, solvents and cleaners.Long life - even on a lathe!

Micro-Mesh (Grades 1500 through 12000) was originally designed to polish most hard plastics, fiberglass, epoxy, gel-coat, raw and finished wood, cultured marble, sold surface, painted surfaces, gold, silver, etc. Micro-Mesh is not an aggressive stock remover. Common sandpaper products are required for the removal of deep scratches prior to using Micro-Mesh to polish the surface back to clarity or a high gloss.
Use wet or dry with either water or water/detergent as a lubricant. You may also use mineral oil, vegetable oil, lemon oil, etc but DO NOT use anything containing solvent as this will delaminate the MICRO-MESH.
Sheets are offered in the following Micro-Mesh grades: 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000, 12000

Great for sanding hard-to-reach places on turnings and carvings. Round style cords. Coated in aluminum oxide grit.
You'll get approximately 50 feet per spool.

The way to smoother sanding is in the palm of your hand with these sanding pads. Changing sandpaper is easy: Unlike traditional block sanders, these pads accept standard 5" hook and loop sandpaper disks (sold separately on page 20). Both the flat style and the round style (flexible for contour sanding) feature an ergonomic design that helps eliminate hand fatigue. Sanding pads sold as a set.

Flexible sponges offer a cleaner way to sand wood, paint, metal, plastic, and drywall. Wash and reuse. Works wet or dry. Outlasts sandpaper!
Small Area Sponge has two sides and measures 4'' x 2-3/4'' x 1'' thick
Contour Sponge is single sided and measures 4-1/2'' x 5-1/2'' x 3/16'' thick.