An inexpensive horsehair bristle brush for many uses. 1/2'' Wide x 7/8" x Long. 5-1/4'' long metal handle.

The Glu-Bot from FastCap is the only glue bottle that will not drip or spill. You never have to clean up glue spills or drips again! Put the glue where you want it and only where you want it. With spill-proof nozzle and vacuum valve that keeps glue level high. 16 oz. capacity.

Dowel Tip Roller for edge gluing Brush tip with detachable cap Fine tip for small joinery projects Biscuit tip with cap

Accurate thermostatic control (can not be adjusted, just on or off). For use with animal hide glue. Operates without water jacket. Removable glue container (1 quart). 6 foot heavy duty 3 wire cord. Built like a boiler, will stand abuse.
No hot spots will not burn glue. UL approved -115 volt ac.

Here's a product you'll stick by. It works for every gluing application you can imagine! Included in this 13-piece kit is a roller head for flat surfaces; flat head for biscuit joinery; a pin-point head for hard-to-reach areas; a 1/2' dovetail head; five separate heads for assorted dowels; stand; caps.

The well dispenses just the right amount of glue for a brush full. The lip keeps glue in the well, not on the sides. Lid tightly seals the well to keep the glue fresh.

Needle Point Glue Injector - #63297 (Shown in far left of picture.) The 1-1/4 '' long needle reaches where other glue applicators will never go. Ideal for getting glue into grooves, crevices and other hard to reach spots. Cap prevents glue from drying. Easy-to-handle plastic bottle holds 1/2 ounce.
Glue Injector - (Shown second from left in photo.) Inject glue into small places. Cap for the tip prevents drying. Ideal for use with white glues, yellow woodworking glues or liquid hide glues. Made from plastic. Available in two sizes. #50468- 15cc or 50476- 30cc
Roller Applicator - 59311 (Shown third from left.) Save assembly time and glue. Eliminates messy dripping. Airtight container keeps glue fresh. Ideal for use with white glues, yellow woodworking glues and liquid hide glues. Made from molded plastic. Holds 8 ounces.
Plastic Squeeze Bottles (Shown in middle of picture.) If you use a lot of glue, save money by buying in bulk and transferring it to these smaller containers. Molded plastic. Marked with 1 ounce graduations on back side. Caps included. Extra tops with caps available.
Adjustable Glue Bottle (Shown on right side of picture.) This bottle lets you adjust the brush within the bottle so the bristles remain moist and pliable while the handle stays clean and dry above the glue. Plastic bottle holds one pint. Brush has 1/2'' wide x 5/8'' long nylon bristles. Replacement brushes also available.

Keep glue or caulk from drying out after opening. These caps offer a tightly sealed fit, and are flexible enough to fit a variety of cap tips.
Reusable! 35 to a pack.

Dispense Pack includes two 15cc syringes, 8 micro tips, 2 stainless steel tips and 2 tip caps. Squeeze Pack includes squeeze bottle, adapter, stainless steel tip, 4 micro tips and storage cap.