An economical spray gun that screws onto a standard 16-oz mason jar and works with your compressor. Save unused portions of finish, paint or stain in the jar by just replacing the lid.
Store each color of paint, stain or finish as you need, and then save the rest in the same jar. Ideal for the hobby woodworker for paints, stains, polyurethane's, lacquers or other finishes. Ideal for sticky or abrasive liquids that can clog more expensive spray guns as liquid does not pass through internal passages like most guns.

Guns include a quart capacity. High volume, low-pressure (HVLP) sprayers eliminate the over-spray and bounce-back of high-pressure models. The increased control results in less waste and better finishing. The lightweight, balanced design enhances spraying comfort. All gun materials are specifically selected for resistance to solvents and the corrosive effects of waterborne paints. Includes a stainless steel fluid inset, fluid needle and alloy resin fluid tip. Includes 32 oz. aluminum cup. No turbine is required.
Use with a 3 horsepower compressor. Rated for 23 psi air inlet pressure and 11.4 CFM to produce 10 psi at the tip.

Features adjustable spray nozzle for horizontal, vertical or round flat positions. With 15' hose for maximum flexibility. Includes viscocity cup for accurate thinning, plus operating and cleaning instructions.

Porter-Cable gravity-feed detail spray gunFluid and air controls allow for fine adjustment for all applications. Has high-impact plastic cup for easy cleanup. 4.5 oz cup capacity. With 2-year limited warranty.

Porter-Cable HVLP spray gunUtilize the latest high-volume, low-pressure (HVLP) technology for high output and low overspray.
Features adjustable fluid and spray controls for precise operation. Has stainless steel fluid nozzle and needle with plastic cup for quick, easy cleanup. Includes air adjusting valve with gauge. 20.0 oz. Cup capacity. With 2-year limited warranty.

This sprayer is powered by a 3-stage, 5'' diameter, variable-speed turbine that supplies a consistent flow of high volume, low pressure air (4 to 6 PSI at 95 to 130 CFM) which atomizes the coating being applied. The result is a fine, even finish - whether youÆre applying paints, stains, primers, lacquers, urethanes, glues, or most any other type of coating. The sprayer is easy to use, safe, environmentally-friendly, and reduces overspray by up to 90%.á All parts are engineered for long life. Spray gun is bleed cup type. Other features include an adjustable spray width from 1/4'' to 10'' and selectable spray pattern indexes; dual air filtration system; air hose, power indicator light; automatic circuit breaker. Uses standard 110V power supply. The Turbinaire HVLP Sprayer system comes complete with the HVLP variable-speed turbine, precision bleeder cup gun, and a heavy-duty, flexible air hose.The Accessory Kit (sold separately) includes 4 needles and tips, 2 air caps, plus one gun cleaning brush and siphon tube filter.HVLP (high volume, low pressure) means that you get minimal overspray. In fact, your transfer efficiency is up to 90%.á The system is easy to use both indoors and out. Safe, clean, and efficient!The adjustable air cap gives you a spray width from 1/4''-10''. Choose from round, vertical or horizontal indexes.