High sheen padding finish is specially formulated for use on round wood objects, such as decorative turnings, pens and more! Simply apply and buff while your project is on the lathe.May be applied to raw wood or cured finish.16 oz. bottle.

Bulls Eye French Polish is the perfect wiping finish for bare or previously finished interior wood surfaces, including cabinets, shelves, furniture, doors, trim, paneling and hobby/craft items.A single coat on bare wood will enhance the detail and color of the wood grain without ambering over time.If a heavier finish is desired, apply multiple coats allowing at least 1 hour dry time between coats.Formulated for wiping or pad application only.Will not yellow or darken with age; resistant to UV light.Recommended for domestic and exotic wood species.Easy cleanup with alcohol or ammonia and water.16 fluid ounces.Warning: Flammable liquid and vapor. KEEP OUT OF REACH OF CHILDREN.

Safe for butcher blocks, cutting boards, wood utensils, salad bowls and other wood surfaces. A completely natural oil that meets all FDA requirements for surfaces that contact food. Deeply penetrates and protects wood. Easy to apply- just wipe or brush on liberally, let penetrate for 5 minutes and wipe off excess.
Available in pints.

Danish oil is unique because its high linseed oil content and its colorant (gilsonite) allow it to penetrate and color unlike pigmented stains. Gilsonite is a mined ore, which comes only in a black walnut color. It is different from pigments, which come from earth clays. Danish oil's best use is on oak where the walnut colors are carried deep into the grain and produce a look that pigments cannot match. The linseed oil in Danish oil dries to a durable finish and can be used as a one-can finish; more coats help build durability. However, for more protection, Danish oil can be top coated with Arm-r-Seal or any other high quality oil based urethane finish. These pure urethanes penetrate and preserve the natural look as well producing a much harder finish.
Danish Oil is available in the following colors: Note: The digitized colors shown are for reference purposes only. Always test stain on a hidden area of the wood to verify desired color. Natural Dark Walnut Light Walnut

EF Extender is used to slow down the drying time of water base finishes and stains. Use EF Extender when conditions are extremely hot or dry. Also when staining a large project EF Extender helps provide more working time.
Note: High humidity can cause the finishes to take longer to dry but will not harm the final finish. EF Stains and Top Coats are perfect for childrenÆs toys and furniture All EF Stains and EF Top Coats are non-toxic after drying!
Learn to transform quality unfinished furniture into treasured heirlooms using General Finishes water base finishes step-by-step instruction video!

This is the hardest, most durable consumer polyurethane top coat on the market today. It contains all the consumer friendly characteristics of PolyAcrylic Blend. In addition it contains a UV Stabilizer to protect it from breaking down in sunlight and to protect the underlying stains from fading. And with its pure polyurethane durability, it can even be used on floors. This is the most durable product.
EF Extender(#80728) is used to open or increase the dry time of water base stains and finishes. Use EF Extender when conditions are extremely hot or dry. Also when staining a large project EF Extender helps provide more working time.
Note: Simply mix 10% to 15% (3-5 fl. oz. per qt.) of EF Extender with any water base stain or finish and mix well.

This fabulous finish was recently rated by Fine Woodworking magazine as "Best Brush-on" in a competition of national brands. It is our standard "work horse" top coat and can be used in furniture and woodwork. Formulated to be durable and consumer friendly, it flows and levels easily and has great adhesion characteristics. It has strong sag resistance for vertical surfaces and its higher polyurethane content provides greater durability than other polyurethane/acrylic blends. Once you use PolyAcrylic Blend you will say to yourself, "Fine Woodworking was right on!"
EF Extender(#80728) is used to open or increase the dry time of water base stains and finishes. Use EF Extender when conditions are extremely hot or dry. Also when staining a large project EF Extender helps provide more working time.
Note: Simply mix 10% to 15% (3-5 fl. oz. per qt.) of EF Extender with any water base stain or finish and mix well.

EF Sanding Sealer is a fast drying water base sealer that sands easily and helps fill the pours of the wood. It dries fast, has a low odor and cleans up with soap and water.

For simple 2-step finishing, wipe on General Finishes Seal-A-Cell for a lustrous finish. After drying, wipe on or use foam brush to apply Arm-R-Seal for a hard, protective finish.Formulated to be wiped on with a cloth or applied with a foam brush, eliminating drips and sags.Penetrates to provide protection and a natural look.

Just wipe on gel with a clean cloth for a drip proof, run proof and uniform finish. Get professional quality results without brush marks. No sanding needed between coats and no unpleasant smell! Satin sheen increases with the number of coats. Won't fade. Use with General Finishes Gelled Stains for a perfect finish.
Covers 200 Square Feet per Quart.

The oils penetrate deep within the wood to highlight the warm natural look, while the urethane ensures a deep hardness.Follow with multiple coats of Arm-R-Seal Urethane topcoat.Seal-A-Cell can be wiped on or applied with a foam brush. ááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááá

Puts a lustrous finish on turnings. Specially formulated mix of pure oils, resins and driers produces a tough, durable finish on highly burnished surfaces such as turned bowls and vases. Non-toxic once dried. May be applied to surfaces that come in to contact with food. Water and abrasion resistant. May be applied with cloth or brush.
Available in pint or quart size.

General Finishes Outdoor Oil is an exterior-rated penetrating linseed oil. It contains UV stabilizers, mildew prohibitors, and twice the oil contained in competing brands. We highly recommend GF Outdoor Oil for all outdoor wood projects, particularly wood furniture.á It can be used by itself, over any stain, and on pressure treated wood.

Fast-drying synthetic oils enhance the beauty of wood furniture, cabinetry and small projects while offering uniform color plus excellent moisture and alcohol resistance. Wipe on. Drip-proof, run-proof and non-fading. Clear satin finish. Interior use only.
Recommended by Michael Dresdner, a world-renowned finishing expert with over 30 years of experience.

Fresh shellac dries faster, permitting the proper application of many thin coats in a short time.á It also ensures that youÆll get the rich, handsome finish you want for chairs, cabinets, musical instruments, and other fine projects.á Because shellac is non-toxic, itÆs an ideal choice for cradles and cribs!á Each Rockler Shellac Kit contains 2 oz. of shellac ''flakesÆÆ and a 16 oz. container with markings for accurate measurement.á To create your shellac, just add the amount of denatured alcohol required for the lb. cut you prefer (denatured alcohol available at most hardware stores or paint supplies).á For example 2 oz of shellac to 4 oz. of alcohol will give you a 4 lb. cut, and 2 oz. of shellac to 8 oz. of alcohol will give you a 2 lb. cut (Depending on the temperature and denatured alcohol you use, allow up to 24 hours for the shellac to dissolve.)
Also available in 8 oz. bulk sizes without mixing container.
Kits are available in your choice of three shades: Orange, for a traditional ''amber'' finish; Blonde, for a near-clear finish; and Garnet, for a more ''antique'' look.

WunderCote has a slight amber tint that will appear more like a varnish finish, unlike some water-based polyurethanes that tend to look like a plastic finish. Non-yellowing, hard, durable polyurethane finish is easy to apply. Can be brushed on with foam brushes, applied with sponge-type pad, or simply wipe on with lint-free cotton rag. Fast-drying - can be sanded and re-coated in 60-120 minutes. Non-yellowing. No offensive order. Environmentally safe. Choose from semi-gloss or gloss, available in 8 oz. or 16 oz. bottles. Coverage is 600 square feet per gallon.

This Rockler exclusive organic finish is made from 100% pure tung oil, making it one of the safest available.

Create a beautiful and safe finish on wooden bowls, cups, spoons, countertops and butcher blocks or any wood surface that contacts food. Easy to apply- just wipe on with a soft clean rag. Achieves the sheen and resistance of a varnish. Dried film is non-toxic for food contact 72 hours after drying. Additional coats can be re-applied at any time if maintenance of item becomes necessary.
Available in pints and quarts.

''One of the most important aspects of finishes, I believe, is that they invite me to touch, to caress, and to take pleasure in the wood surface.'' Sam Maloof. MaloofÆs Poly/Oil Finish A custom blend of polyurethane varnish and natural oils developed by Sam Maloof to beautifully finish his finest pieces. Ideal for use on furniture, cabinets and millwork. Enlivens wood grain and adds warmth to itÆs color. Gives your project the look of hand rubbed satin finish in half the time it takes using pumice and rottenstone. Consider using Sam Maloof's Oil/Wax for the final coat to complete the look. Sam Maloof Oil/Wax Finish A blend of oils and waxes used as a final coat over the Sam Maloof's Poly/Oil finish to create a soft hand rubbed appearance while enlivening the wood character. Sam recommends using this topcoat on fine pieces that won't be exposed to heat or moisture. Applied with a cloth. For more information on making furniture and finishing with Sam Maloof see his new book.

Safe for use on childrenÆs toys and furniture. A completely non-toxic finish when cured. Applies easily like an oil finish, yet looks like a varnish. Use on bare or stained wood surfaces.

Weather-treat wood and still allow it to breathe!
Excellent solution for decks and lawn furniture, as well as renewing finish on existing structures. Chinawood deck oil is the most durable finish, conditioner and restorer for pressure treated lumber AND among the only products in existence to weather-treat any kind of wood and still allow it to breathe.
Comes in two sizes, 32 and 128 oz.

Zinsser Bullseye SealCoat dries to the touch in 10 minutes and is ready to sand/recoat in 40 minutes! Plus itÆs compatible with all clear finishes. Easily cleans up with ammonia and water. Available in 1 quart and 1 gallon sizes. Guaranteed Compatible with ALL Finishes Alkyd-modified polyurethane Water-base acrylic polyurethane Catalyzed Finishes Super Fast Dry Time Dust-free in 5 minutes Dry to touch in 10 minutes Ready to sand/recoat in 20-40 minutes Other Great Features Fast drying pre-stain conditioner Bond coat over stearated finishes Gives depth and beauty to wood grain Will not raise or swell wood grain Will not turn yellow or darken with age Can be applied in temps as low as 0 degrees Fahrenheit Easy clean up with ammonia and water