Home Decor

radmegan_travel_piggybank.jpg

This recycled globe travel bank from Megan at Radmegan in Words and Pictures is such a great idea for upcycling an old or outdated globe into a secret place to stash your travel fund. Every time you put money in, you get to see the map and get excited about all of the adventures to come! Head on over to her site to see the full how-to.

laurie_wisbrun_llama_pillow.png

laurie_wisbrun_llama_fabric.png

I'm not ashamed to admit that I let out an actual "squeee!" when I saw this latest collection of fabrics from Laurie Wisbrun. Her Llama prints are adorable, and the pillow panel means you can whip up one of these adorable pillows in no time flat. See more over on her blog.

Related:
Perfectly Portable Cushion

LOVE yard letters.jpg

My Sisters Suitcase made these sweet, romantic LOVE letters for Valentine's Day. I love the gradient effect the yarn has. This would be great for a kid's room or wedding as well. Or just a nice 'Welcome' sign to your home. What would you spell out?


More

CZ_CraftExclusive.gif

woodboxes_final.JPG

By Sonya Nimri

Living in cramped quarters, every inch of one's walls become precious real estate, where storage must be maximized and stylized to get the most for your space. These shelves are a great solution if you have wood from another project or random pieces lying around. I happened to find some oak table leaves in the alley that came in handy for this project.

Materials

3/4"-thick wood, 4 pieces at 11 3/4" (L) x 9 1/2" (W) x 3/4", and a fifth piece at 11 3/4" (L) x 2" (W) x 3/4"
Measuring tape
Pencil
Drill with the following attachments: Phillips head screw bit and countersink (if you are using a hardwood like oak or teak. For pine or MDF, no countersink attachment is needed.)
It is helpful but not necessary to have two drills so you don't have to keep rotating the bits.
15 2" screws

Directions

wmsb_step2.JPG

Step 1: Take your 4 pieces of 11 3/4" (L) x 9 1/2" (W) x 3/4" wood and assemble them into a sideways box so that the two sides are on the top and bottom (it's your choice on which length of the box will be the sides).

wmsb_step3c.JPG

wmsb_step3a.JPG

Step 2: Now it is time to set your screws into your first side, which is facing up. (You will be drilling down into the box.) Take a pencil and your measuring tape and mark your side in 3 places that are each 3/8" down from the edge of your first side. 2 marks should be spaced 1" from each end and then your third mark should be exactly in the middle.

wmsb_step4a.JPG

wmsb_step4b.JPG

Step 3: If you are using a soft wood like pine or MDF, you can drill your screws in right away starting at the ends, then drill the middle screw in. I used reclaimed oak, so in order for the screws to penetrate the wood, I needed to pre-drill holes. I used a countersink drill attachment, which leaves a perfectly shaped hole for the screw as well as room for the head of the screw to sink into the wood, leaving the surface of the box perfectly flat.

Step 4: Repeat steps 2-3 on the opposite end of the same piece of wood.

wmsb_step6.JPG

Step 5: Turn the box over and repeat Steps 2-4 on the other side. The fourth (last) edge might be the trickiest because the wood might stick out a little. This will happen if your screws aren't perfectly straight on the other 3 edges. Not a problem - just hold it to form a right angle and drill away.

wmsb_step7a.JPG

wmsb_step7b.JPG

Step 6: Now for your long, slim piece of wood to mount your box to the wall. On the back of your box, mark the center, 3/8" down from the top edge. Then hold the piece of wood in place, underneath the edge that you just marked (as shown in photo), and pre-drill a screw into your mark. Put a screw in.

wmsb_step8a.JPG

wmsb_step8b.JPG

Step 7: Measure out 2 more places to add 2 more screws. I put them 1" from each side.

wmsb_step9.JPG

Step 8: Drill a couple of holes through the back of the long, slim piece of wood. I put mine 2" from each side.

wmsb_finished.JPG

Step 9: Find your studs and attach your box to the wall by sinking the screws into the studs through your pre-drilled holes.

About the Author:

Sonya.Photo.jpg

Sonya Nimri lives and crafts in a little house in Venice Beach, Calif. She is the author of two books: Beadalicious and Just for the Frill of It. Visit her at sonyastyle.com for lots of project ideas.

XL paper flowers.jpg

Green Wedding Shoes is a wedding blog, but this tutorial for making DIY XL flowers is so pretty it can be used for all sorts of occasions. Photobooth backdrop or props, a big boquet on a table, several clustered and mounted on a wall. How would you use them?

kids_drawing_duvet.png

My daughter is obsessed with drawing anime-type cats and Pokemon, and her drawings always bring a smile to my face. I love the idea of decorating with my kids' art, and this project from Jen of A Thousand Words takes a new spin on the just-stick-it-on-the-fridge way of display. She created an amazing duvet cover using 120 of her son's original Pokemon drawings. I love the look of it, and the meaning behind it makes it even more awesome. See how it all came together over on her blog.

Related:
Kids' Drawing to Stamp
Stuffed Toy From a Child's Drawing
Embroidered Kid Art Pillow by Vickie Howell

test tube chandelier.jpg

This test tube chandelier is so rad and can be interpreted in a million ways. How would you spin it? Designed by The Maria S.C. lamp, designed by Pani Jurek, found on Design Milk.

rainbow test tube chandelier.jpg

01-bookshelf.jpg

Sweet bookcase.

epbot_coin_desk.jpg

This penny desk tutorial from Jen at EPBOT certainly takes mosaic-making to a whole new level! And, while I'm definitely not suggesting that you take legal currency out of circulation to make your own, it might not be too hard to get your hands on some novelty coins or currencies that no longer exist.


[Via Decor Hacks]

DIY book planters.jpg

The Violet Hours featured a really lovely vintage book planter that would be really fun to create for your home.


More: